Shuttle * Products * XPC * SN85G4/V2 * Info/FAQ * Password after BIOS update?

Mini aluminum barebone system with socket 754

Supports Athlon 64 with FSB400

Chipset: NVIDIA nForce3 150

Low noise with ICE-Heatpipe cooling

Integrated 6-in-1 Memory Card Reader

Serial ATA150 Raid

10/100MBit LAN

1x AGP (8X), 1x PCI (for simultaneous use)

2x DDR400/333/266/200, 6x USB 2.0

6-channel-audio, firewire and more

SN85G4V2 with Shuttle Silent-X 240W PSU

Frequently asked questions

Links concerning this chapter:

Avoiding CMOS Setting Utility password requests after a BIOS update.

When updating from any BIOS version older than fn85s015.bin, CMOS Setting Utility will request you to enter a password. To avoid this request, you have two options. Prior to flashing, check the Clear CMOS tab in the WinFlash utility. Or. After flashing, clear CMOS with a jumper (remember to power down and disconnect the power cord).

Note: If you use Award flash utility and update BIOS in DOS-ModePlease type the command: awdflash.exe fn85sxxx.bin /cc
(where fn85sxxx.bin is the current BIOS version you have)

Navigation

Home
Products
XPC
SN85G4/V2
Info/FAQ
Versions
BIOS-Update
AGP only 1,5V
Clear CMOS without Jumper
Hardware monitoring
Booting Linux
Hitachi S-ATA HDD hangs?
Auto/Manual RAID mode
Example configuration
Install OS on C:
Install Serial-ATA
Password after BIOS update?
Cool 'n' quiet
Hardware compatibility

XPC SN85G4 and SN85G4V2

Frequently asked questions

Avoiding CMOS Setting Utility password requests after a BIOS update.