Caution: The current Shuttle website is located here: http://www.shuttle.com
This website includes backup data for products until September 2004.
 
 
Products Support Glossary
Print
 
HomeProductsXPCSN85G4/V2Mainboard FN85
 
 

 

XPC SN85G4 and SN85G4V2

Subchapters: Specification | Accessories | Mainboard FN85 | Download | Info/FAQ | Images | Press |
 

 

  • Mini aluminum barebone system with socket 754
  • Supports Athlon 64 with FSB400
  • Chipset: NVIDIA nForce3 150
  • Low noise with ICE-Heatpipe cooling
  • Integrated 6-in-1 Memory Card Reader
  • Serial ATA150 Raid
  • 10/100MBit LAN
  • 1x AGP (8X), 1x PCI (for simultaneous use)
  • 2x DDR400/333/266/200, 6x USB 2.0
  • 6-channel-audio, firewire and more
  • SN85G4V2 with Shuttle Silent-X 240W PSU
       

 

Mainboard FN85


Mainboard FN85 only available in conjunction with XPC SN85G4.

  • Chipset:
    NVIDIA nForce3 150
  • Processor support
    Socket 754 CPU supports
    AMD Athlon 64 with FSB400
    Burn Proof CPU Protection (Automatic power off when overheated)
  • Expansion slots:
    1 x AGP (v3.0) slot supports 8X and 4X mode
    Important Note: AGP slot supports 1,5V graphics cards only
    1 x 32 Bit PCI (v2.2)
    AGP- and PCI-Slot can be used simultaneously
  • IDE-slots
    Onboard IDE controller with 2x ATA133 connector
  • Serial ATA150 Raid
    Onboard Serial ATA150 Raid Controller
  • Multimedia:
    AC97 v2.2 Realtek ALC650 sound function with 6-channel support
    Connections on the backpanel: Bass/Center, Line-Out (Front-Out), Rear-Out
    Connections on the frontpanel: microphone and line-in/out
    Onboard: Audio input for CD-ROM and AUX
  • Networking:
    10/100MBit LAN with RJ45 connector on the backpanel
    Realtek 8201BL chipset
  • 1394 Firewire
    Firewire-Controller Realtek 8801
    with 2x 1394 connectors (1x backpanel, 1x frontpanel)
    supports 400/200/100 Mbit/s transfer rate
  • Backpanel-connectors:
    1 x PS/2 Mouse
    1 x PS/2 Keyboard
    1 x Serial
    2 x USB 2.0 (4 more onboard)
    1 x Firewire (IEEE1394, one more connector onboard)
    1 x  Network RJ45
    Audio: 3 connectors for 6-channel sound (Bass/Center, Front, Rear)

    Optical SPDIF in and out on the backpanel of SN85G4
  • Onboard-Connectors:
    1 x Floppy drive (up to 2,88 MB)
    4 x USB 2.0 (two more on the backpanel)
    1 x SPDIF input
    1 x SPDIF output
    1 x Firewire (IEEE1394, two more on the backpanel)
    3 x Audio frontpanel connectors (microphone and line-in/out)
    1 x CDROM audio-in
    3 x Fan (CPU, AGP, case)
  • Memory:
    2 x 184-Pin for PC3200 (DDR400), PC2700 (DDR333), PC2100 (DDR266) or PC1600 (DDR200) unbuffered DDR SDRAM memory
    with 200, 166, 133 or 100MHz clock frequency up to 2GB capacity 
  • Hardware monitoring
    CPU-temperature, voltage and fan revolution can be monitored
    AutoGuardian fan
    control
  • Power Management
    ACPI Version 1.0 (Advanced Configuration and Power Interface)
    supports power saving modes: S1 (Snoop), S3 (Suspend to RAM), S4 (Suspend to DISK), S5 (Soft-Off)
    On/Off button with two functions: Suspend mode/ soft off
  • BIOS
    Award V6.0PG PnP Green BIOS
    stored in 2MBit Flash-memory chip
  • ATX power supply connector
    240W, standard 20-Pin-ATX power supply connector + 4 pins
  • Form Factor
    Flex/MicroATX: 25,4 x 18,5 cm
  • Conformity
    This device is classed as a technical information equipment (ITE) in class B and is intended for use in living room and office. The CE-mark approves the conformity by the EU-guidelines:
    - EMV-guideline 89/336/EWG electromagnetic tolerance
    - LVD-guideline 73/23/EWG use of electric devices within certain voltage-limits

 

 

  Navigation
Home
Products
XPC
SN85G4/V2
Specification
Accessories
Mainboard FN85
Download
Info/FAQ
Images
Press

Shuttle Computer - European Headquarters +++ Disclaimer +++ Last update: 30.4.2008