Path: HomeProductsXPCSN85G4/V2Info/FAQPassword after BIOS update?

XPC SN85G4 and SN85G4V2

  • Mini aluminum barebone system with socket 754
  • Supports Athlon 64 with FSB400
  • Chipset: NVIDIA nForce3 150
  • Low noise with ICE-Heatpipe cooling
  • Integrated 6-in-1 Memory Card Reader
  • Serial ATA150 Raid
  • 10/100MBit LAN
  • 1x AGP (8X), 1x PCI (for simultaneous use)
  • 2x DDR400/333/266/200, 6x USB 2.0
  • 6-channel-audio, firewire and more
  • SN85G4V2 with Shuttle Silent-X 240W PSU
       

 

Frequently asked questions

Links concerning this chapter:

 

Avoiding CMOS Setting Utility password requests after a BIOS update.

When updating from any BIOS version older than fn85s015.bin, CMOS Setting Utility will request you to enter a password. To avoid this request, you have two options. Prior to flashing, check the Clear CMOS tab in the WinFlash utility. Or. After flashing, clear CMOS with a jumper (remember to power down and disconnect the power cord).

Note: If you use Award flash utility and update BIOS in DOS-ModePlease type the command: awdflash.exe fn85sxxx.bin /cc
(where fn85sxxx.bin is the current BIOS version you have)

 


Print version of this page: http://eu.shuttle.com/sn85g4_cmos.htm
Shuttle Computer - European Headquarters - All rights reserved - Date: 30.4.2008