XPC SB61G2 / SB61G2V3

Links concerning this chapter:

• XPCs for Pentium 4 with Socket 478 and Intel chipset
• Mainboard FB61
• XPC Accessory
• Carrying Bag for XPC (PF9, PF40)
• XPC Backpack (PF30)
• XPC-Accessories to modify the front panel
• Mirror Phase PF61 for SB61G2, SB65G2, SB75G2
• XPC CosmetiX Design-Kit PF22 for SB61G2, SB61G2 RefleXion, SB65G2, SB75G2 
• Black Mesh Window Case Cover (PF16)
• Colorful Case Cover (PF12)
• XPC Wireless LAN Module, 54 MBit/s (PN15)
• XPC Wireless LAN Module, 11 MBit/s (PN11)
• USB/Infrared Remote Control (PN31)
• Standard XPC Power Supply Unit (200W)
• SilentX: 250W-Power Supply Unit for XPC (PC40)
• Internal 6-in-1 Card Reader with USB 2.0 (PC12)
• Internal 6-in-1 Card Reader with USB 1.1 (PC10)
• DVI/TVout-AGP-Cards (CV2x)
• DVI/TVout-AGP-Card for SB51G, SB61G2 (CV21)
• Parallelport Printer Cable for XPCs (PC8)
• Socket 478 Mainboards with Intel chipset
• High resolution images XPC SB61G2 / SB61G2V3
• Shuttle-Form-Factor Mainboard FB61
• Accessories included in delivery
• Specification RefleXion XPC
• Short tabulated overview
• Which Mainboards support Hyper-Threading

 

Versions	SB61G2	SB61G2V3
Processor Support	supports Northwood, the 'old' Willamette and  the 'new' Prescott are not supported	supports Northwood and Prescott, the 'old' Willamette is not supported
Box		Version label on the top and side of the box.
PSU	Standard mini power supply 200 Watt (e.g. Enhance)	optimized Shuttle SilentX 250 Watt power supply
Mainboard Version	Mainboard version up to v2.x (e.g. v 2.1)	Mainboard version 3.5 or higher
Other		Improved Heat Pipe efficiency Improved cable management for better air flow

Is the SB61G2 capable of having most ports/slot occupied as a full system?
Base on Shuttle “Full Loading” test standard, the SB61G2 is tested with benchmark software for over 3 days with following installed:

• Model: SB61G2BIOS: fb61s034
• CPU: P4 3.2GHz FSB 800MHz
• Memory: A-DATA DDR400 (PC 3200) 512MB * 2
• HDD: WD Raptor WD360 SATA 10,000rpm
• DVD-ROM: SONY DRU-510A DVD+RW
• USB device: Shuttle PC12 - USB2.0 card reader
• AGP card: ATi Radeon 9800 PRO (Build by ATi)
• PCI card: Hauppauge TV Tuner card
• Operating System: Windows XP Pro. + Service Pack 1

 

When overclocking the CPU FSB Clock, the memory frequency will also overclock at the same time. When overclocking make sure that you set the memory frequency to lower level, such that increases in FSB keep the memory frequency in a stable range. First deselect [Auto] for the “Memory Frequency For” as shown below. Try to set memory frequency to a lower level (ex. DDR 266 / 333).

 

1. Please press “Tab” key immediately when your screen show up the Intel logo. 

2. Please check the message from your monitor.

Note: Please refer to the user’s manual page 40, you have to use the same size and type DIMMs on Channels 0 and 1.

 

An example RefleXion XPC full system is listed below. This full system has been tested according to Shuttle’s “Full Loading” test standard. With the following components installed, the RefleXion XPC continuously runs benchmarking software for over three days.

• Model: RefleXion XPC
• BIOS: fb61rs06
• CPU: P4 3.4GHz FSB 800MHz
• Memory: Kingston DDR400 (PC 3200) 1GB * 2
• HDD: WD Raptor WD360 SATA 10,000rpm
• DVD-ROM: Shuttle 16X DVD_ROM (Built in)
• USB device: Shuttle 6-in-1 Card Reader (Built in)
• Shuttle Wireless LAN Module (Built in)
• AGP card: ATi Radeon 9800 XT (Build by ATi)
• PCI card: WinFast TV2000 TV Tuner card
• Operating System: Windows XP Pro. + Service Pack 1

 

When overclocking the CPU FSB Clock, the memory frequency will also overclock at the same time. When overclocking make sure that you set the memory frequency to lower level, such that increases in FSB keep the memory frequency in a stable range. First deselect [Auto] for the “Memory Frequency For” as shown below. Try to set memory frequency to a lower level (ex. DDR 266 / 333).

 

The following links contain freeware/shareware for CPU/System/HDD temperature monitoring utilities :

• Motherboard Monitor (MBM) http://mbm.livewiredev.com/
• Hardware Sensors Monitor http://www.hmonitor.com/
• SpeedFan http://www.almico.com/speedfan.php
• SiSoftware Sandra http://www.sisoftware.co.uk/
• HDD Temperature http://www.hddtemp.com/

 

This could be due to the internal card reader using the “C” drive title (and D, E F). Since the card reader is pre-installed, it has automatically been allocated the first 4 letters (starting from C). Try one of the follow solutions to install your operating system onto the C drive and avoid such issues:

• 1. Remove the card reader cable before install operating system.
• 2. Disable onboard USB controller before install operation system.