Caution: The current Shuttle website is located here: http://www.shuttle.com
This website includes backup data for products until September 2004.
 
 
Products Support Glossary
Print
 
HomeProductsXPCSB61G2/V3Mainboard FB61
 
 

 

XPC SB61G2 / SB61G2V3

Subchapters: Specification | Accessories | RefleXion | Mainboard FB61 | Download | Info/FAQ | Images | Press |
 

 

   
  • Mini aluminum barebone system
  • Socket 478 supports 800/533/400FSB
    and Hyper-Threading
  • New: SB61G2V3 supports Prescott
  • Chipset: Intel 865G / ICH5
  • Low noise with ICE-Heatpipe cooling
  • Network connector: 100/10 MBit
  • 1x PCI, 1x AGP (8X), 2x Dual Channel DDR400/333/266/200 memory,
    8x USB 2.0, 2x Firewire
  • 6-channel audio with  SPDIF in/out
  • 2x Serial ATA connectors onboard
  • New: SB61G2V3 with 250W Silent-X Power Supply

 

Mainboard FB61

 

Note: Mainboard available only in conjunction with XPC SB61G2 or RefleXion !

  • Chipset:
    Intel 865G/ICH5
    BUS: 800/533/400MHz 
  • Processor support
    Socket 478 CPU support
    Intel Pentium 4 processor for socket 478 with 800, 533 and 400MHz FSB
    The Intel Pentium 4 Northwood processor core is supported,
    the Prescott core is supported since mainboard version 3.5 (SB61G2V3 only),
    the 'old' Willamette core is not supported. 
    FSB infinitely adjustable: 100...255MHz (in 1 MHz-steps)
    CPU multiplier automatically, or adjustable from 8 to 50x
  • Expansion slots:
    1 x AGP (8X)
    1 x 32 Bit PCI (v2.2)
  • IDE-Controller
    Onboard IDE Controller ATA100
    supports up to four IDE drives
  • SATA-Controller
    Onboard Serial ATA150 Controller
    supports 2 devices 
  • Multimedia:
    AC97 2.2 6-Channel sound
    Connectors on the backpanel: 6 channel audio-out (analog: bass/center, rear, front), optical SPDIF in/out
    Connectors on the frontpanel: microphone, line-out
    onboard: Audio-input for CDROM drive
  • Networking:
    100/10 MBit, Realtek 8100B
  • Backpanel connectors:
    1 x PS/2 Mouse
    1 x PS/2 Keyboard
    1 x IEEE1394 Firewire 400
    1 x Serial
    1 x RJ45 Ethernet 100/10 Mbps
    4 x USB 2.0 (total 8)
    6 Channel audio out (analog: bass/center, rear, front)
    optical SPDIF in/out
  • Onboard connectors:
    1 x Floppy drive (up to 2,88 MB) 
    2 x IDE (ATA-100)
    2 x Serial ATA150
    4 x USB 2.0 (two for the frontpanel, two more on the backpanel, totally 6)
    1 x SPDIF-in
    2 x Audio Frontpanel connections (microphone and line-out)
    1 x CDROM audio in 
    1 x Infrared interface
    3 x Fan (CPU, AGP, Case) 
  • Memory:
    2 x 184-Pin for Dual Channel PC1600 (DDR200), PC2100 (DDR266), PC2700 (DDR333) or PC3200 (DDR400)
    unbuffered DDR SDRAM memory with 100 or 200MHz clock rate up to 2GB capacity
    now with "turbo mode" (in BIOS-Setup) for faster memory access
  • Hardware monitoring
    CPU temperature, voltages und fan revolutions 
  • Power Management
    ACPI Version 1.0 (Advanced Configuration and Power Interface)
    supports power saving modes: S1 (Snoop), S3 (Suspend to RAM), S4 (Suspend to DISK), S5 (Soft-Off)
    On/Off buttons with two functions: Suspend mode/ soft off
    Power on after power failure
  • BIOS
    Award V6.0PG PnP Green BIOS
    stored in 4MBit Flash memory chip 
  • ATX-power supply connector
    Standard 20-Pin-ATX-power supply connector + 4-pins
  • Form Factor
    Micro-ATX: 254mm x 185mm
  • Conformity
    This device is classed as a technical information equipment (ITE) in class B and is intended for use in living room and office. The CE-mark approves the conformity by the EU-guidelines:
    - EMV-guideline 89/336/EWG electromagnetic tolerance
    - LVD-guideline 73/23/EWG use of electric devices within certain voltage-limits

 

  Navigation
Home
Products
XPC
SB61G2/V3
Specification
Accessories
RefleXion
Mainboard FB61
Download
Info/FAQ
Images
Press

Shuttle Computer - European Headquarters +++ Disclaimer +++ Last update: 30.4.2008