Shuttle * Products * XPC * ST61G4 * Info/FAQ * OS with Serial-ATA

Standard version (silver), XIB-Version (black)

Mini aluminum barebone-system

Socket 478 supports 400/533/800FSB and Hyper-Threading

Chipset: ATI Radeon 9100 IGP (RS300), IXP 150

Low noise by ICE-Heatpipe cooling and quite power supply

2x Serial-ATA Raid (0,1), 10/100 network (RJ45)

1x AGP (4X/8X), 1x PCI, 2x DDR400/333/266/200, 6x USB 2.0

6-channel-audio with SPDIF in/out

6 in 1 Card Reader (CF I/II, MMC, MS, SD, SM)

S-Video out (NTSC/PAL), FireWire 400

New: Prescott support since BOM version 14

Frequently asked questions (FAQ)

How do I install OS on SATA hard drive on the ST61G4?

To begin, installation of SATA hard drives on the ST61G4 requires a floppy drive and floppy disk with the correct RAID driver.

Before you start the installation you need to do the following (This procedure will need to be done on another system):
1. Insert the motherboard driver CD into your CD-ROM.
2. Copy all files in RAID directory (D:\silicon\RAID) to a floppy disk. (Current CD driver is in Drive D)
3. Use the floppy disk in the installation procedure as follows. Go into the BIOS setting to enable; Drive A, Onboard FDC Controller and SiIicon Image SATA Raid ROM.

Enable Drive A

Enable Onboard FDC Controller

Enable Silicon Image Raid ROM Support

Installing Windows

Press F6 function key when RAID setup message string come up.

Press S key to select RAID driver.

Select the driver for your operating system.

After the driver is selected. Press Enter to continue installing Windows.

Navigation

Home
Products
XPC
ST61G4
Info/FAQ
Related Links
Versions
Hardware compatibility
OS with Serial-ATA
Different Settings
Install on Drive C:
Slots/Ports occupied
Card Reader Cable
System hang

XPC ST61G4

Frequently asked questions (FAQ)

How do I install OS on SATA hard drive on the ST61G4?