XPC ST61G4

Note: Mainboard ST61 is only in conjunction with XPC ST61G4.

• Chipset:
  Northbridge ATI Radeon 9100 IGP (RS300) + Southbridge IPX150 
  FSB: 800/533/400MHz
• Processor support:
  Socket 478 CPU supports
  Intel Pentium 4 processor / Celeron with 800, 533 or 400MHz FSB
  ( Northwood is supported, Willamette is not supported,
  Prescott is supported since BOM version 14 )
• Expansion slots:
  1 x AGP (8X)
  1 x 32 Bit/33MHz PCI
• Parallel-ATA-Controller
  Onboard IDE Controller ATA100
  supports up to four IDE devices
• SATA-RAID-Controller
  Onboard Serial ATA150 RAID controller
  support Level 0 and 1
• Sound-Controller:
  On board Realtek 650F 6 Channel sound
  Connetors on the backpanel: 6 channel audio out  (analog: bass/center, rear, front), optical SPDIF in/out
  Connetors on the frontpanel: microphone, line-in, line-out, 
  More line-ins on the mainboard for SPDIF, CD-ROM and AUX.
• Networking:
  Fast Ethernet: 10/100 MBit/s mit RJ45 connector
• Backpanel connectors:
  1 x PS/2 Mouse
  1 x PS/2  Keyboard
  1 x Serial Port 1
  1 x VGA Port
  1 x RJ45 LAN
  1 x TV-OUT S-Video (adapter for composite included in delivery)
  2 x USB 2.0 ( 2X frontpanel, 2X backpanel, 2X on board, total 6)
  1 x Firewire (1394 Port)
  Connectors on the backpanel: 6 channel audio-out (analog: bass/center, rear, front),
  optical SPDIF in/out
  1 x optical parallel port (additional adapter necessary)
• Onboard connectors:
  1 x Floppy drive (up to 2,88 MB) 
  2 x IDE (ATA-100)
  2 x S-ATA Raid Ports (150MB/s, RAID 0/1)
  2 x USB 2.0 (2X frontpanel, 2X backpanel, 2X onboard, total 6)
  1 x SPDIF (in/out)
  1 x CDROM audio-in
  1 x Audio (AUX)
  1 x Parallel Port (onboard, adapter necessary)
  1 x Infrared interface
  3 x Fan connector
  1 x 20-Pin ATX and 4-Pin ATX 12V connector for power supply
• Memory:
  2 x 184-Pin for Dual Channel PC1600 (DDR200), PC2100 (DDR266), PC2700 (DDR333) or PC3200 (DDR400)
  unbuffered DDR SDRAM memory with 100, 133, 166 or 200MHz clock frequency up to 2GB capacity
• Hardware monitoring
  CPU temperature, system voltage and fan revolution
• Power management
  ACPI Version 1.0 (Advanced Configuration and Power Interface)
  supports power saving modes: S1 (Snoop), S3 (Suspend to RAM), S4 (Suspend to DISK), S5 (Soft-Off)
  On/Off button with two functions: Suspend mode/ soft off
• BIOS
  Award V6.0PG PnP Green BIOS
  stored in 4MBit Flash memory chip
• ATX-power supply connection
  standard 20-Pin-ATX-power supply connction + 4-pins
• Form Factor
  Flex/Micro-ATX: 254mm x 185mm
• Conformity
  This device is classed as a technical information equipment (ITE) in class B and is intended for use in living room and office. The CE-mark approves the conformity by the EU-guidelines:
  - EMV-guideline 89/336/EWG electromagnetic tolerance
  - LVD-guideline 73/23/EWG use of electric devices within certain voltage-limits