Path: HomeProductsXPCST61G4Mainboard ST61

XPC ST61G4

   

Standard version (silver), XIB-Version (black)

  • Mini aluminum barebone-system
  • Socket 478 supports 400/533/800FSB and Hyper-Threading
  • Chipset: ATI Radeon 9100 IGP (RS300), IXP 150
  • Low noise by ICE-Heatpipe cooling and quite power supply
  • 2x Serial-ATA Raid (0,1), 10/100 network (RJ45)
  • 1x AGP (4X/8X), 1x PCI, 2x DDR400/333/266/200, 6x USB 2.0
  • 6-channel-audio with SPDIF in/out
  • 6 in 1 Card Reader (CF I/II, MMC, MS, SD, SM)
  • S-Video out  (NTSC/PAL), FireWire 400
  • New: Prescott support since BOM version 14



 

 

Mainboard ST61

     

Note: Mainboard ST61 is only in conjunction with XPC ST61G4.

  • Chipset:
    Northbridge ATI Radeon 9100 IGP (RS300) + Southbridge IPX150 
    FSB: 800/533/400MHz
  • Processor support:
    Socket 478 CPU supports
    Intel Pentium 4 processor / Celeron with 800, 533 or 400MHz FSB
    ( Northwood is supported, Willamette is not supported,
    Prescott is supported since BOM version 14 )
  • Expansion slots:
    1 x AGP (8X)
    1 x 32 Bit/33MHz PCI
  • Parallel-ATA-Controller
    Onboard IDE Controller ATA100
    supports up to four IDE devices
  • SATA-RAID-Controller
    Onboard Serial ATA150 RAID controller
    support Level 0 and 1
  • Sound-Controller:
    On board Realtek 650F 6 Channel sound
    Connetors on the backpanel: 6 channel audio out  (analog: bass/center, rear, front), optical SPDIF in/out
    Connetors on the frontpanel: microphone, line-in, line-out, 
    More line-ins on the mainboard for SPDIF, CD-ROM and AUX.
  • Networking:
    Fast Ethernet: 10/100 MBit/s mit RJ45 connector
  • Backpanel connectors:
    1 x PS/2 Mouse
    1 x PS/2  Keyboard
    1 x Serial Port 1
    1 x VGA Port
    1 x RJ45 LAN
    1 x TV-OUT S-Video (adapter for composite included in delivery)
    2 x USB 2.0 ( 2X frontpanel, 2X backpanel, 2X on board, total 6)
    1 x Firewire (1394 Port)
    Connectors on the backpanel: 6 channel audio-out (analog: bass/center, rear, front),
    optical SPDIF in/out

    1 x optical parallel port (additional adapter necessary)
  • Onboard connectors:
    1 x Floppy drive (up to 2,88 MB) 
    2 x IDE (ATA-100)
    2 x S-ATA Raid Ports (150MB/s, RAID 0/1)
    2 x USB 2.0 (2X frontpanel, 2X backpanel, 2X onboard, total 6)
    1 x SPDIF (in/out)
    1 x CDROM audio-in
    1 x Audio (AUX)
    1 x Parallel Port (onboard, adapter necessary)
    1 x Infrared interface
    3 x Fan connector
    1 x 20-Pin ATX and 4-Pin ATX 12V connector for power supply
  • Memory:
    2 x 184-Pin for Dual Channel PC1600 (DDR200), PC2100 (DDR266), PC2700 (DDR333) or PC3200 (DDR400)
    unbuffered DDR SDRAM memory with 100, 133, 166 or 200MHz clock frequency up to 2GB capacity
  • Hardware monitoring
    CPU temperature, system voltage and fan revolution
  • Power management
    ACPI Version 1.0 (Advanced Configuration and Power Interface)
    supports power saving modes: S1 (Snoop), S3 (Suspend to RAM), S4 (Suspend to DISK), S5 (Soft-Off)
    On
    /Off button with two functions: Suspend mode/ soft off
  • BIOS
    Award V6.0PG PnP Green BIOS
    stored in 4MBit Flash memory chip
  • ATX-power supply connection
    standard 20-Pin-ATX-power supply connction + 4-pins
  • Form Factor
    Flex/Micro-ATX: 254mm x 185mm
  • Conformity
    This device is classed as a technical information equipment (ITE) in class B and is intended for use in living room and office. The CE-mark approves the conformity by the EU-guidelines:
    - EMV-guideline 89/336/EWG electromagnetic tolerance
    - LVD-guideline 73/23/EWG use of electric devices within certain voltage-limits

 


Print version of this page: http://eu.shuttle.com/ft61.htm
Shuttle Computer - European Headquarters - All rights reserved - Date: 30.4.2008