• Chassis
    Robust black plastic chassis with large rubber feet
    Dimensions: 124 mm (H) x 60 mm (W) x 205 mm (L) = ca. 1.5 litres
    Weight: 550 g
    Kensington Security Slot at the back panel (also called a K-Slot or Kensington lock) as a part of an anti-theft system
  • Storage Bay, Hard disk support
    One storage bay (storage drive not included)
    Supports one 8.9 cm (3.5") hard disk drive up to 6 TB capacity (or more)
    Easy screw-free hard disk installation (no tools required).
    Supports hard disk spin-down timer
    Supports check/format disk, SMART information report, disk usage status report
    Hard disks must support SMART temperature feature with temperature sensor
  • Network connector / IP setting
    1x Gigabit LAN (RJ45, rear)
    Supports Wake-on-LAN (WOL) [4]
    Supports IEEE P802.3az Energy Efficient Ethernet (EEE)
    IP Configuration: Supports Static IP or Auto IP by DHCP server
    Supports Hostname/Groupname
  • Integrated WLAN AP
    Wireless LAN Access Point / Hotspot (can be enabled/disabled)
    IEEE 802.11 b/g/n (max. 54 Mbit/s)
    Encryption methods: WEP 64/128 bits, WPA, WPA2
    Frequency band: 2.4 GHz
    Bandwidth settings: 20 and 40 MHz
  • USB Connectors
    1x USB 2.0 (type A, front), supports Auto-Copy function
    1x USB 2.0 (type A, rear)
    Both USB ports support external devices like hard disks, flash drives, 
    printers, digital camera and USB hubs. 
    Memory can be shared to local network.
  • Card Reader
    Buillt-in card reader in the front panel
    Supports SD, SDHC and SDXC flash memory cards
    Supports Auto-Copy function
  • Buttons (rear)
    Main power button
    Reset button (hole) for admin passwort reset
  • LED Indicators
    KS10 comes with six LED indicators with the following behavior:
    1) System LED: dual colour (operating mode/error: blue/red)
    2) HDD LED: dual colour (access/error: blue/red)
    3) SD card reader LED: single colour (access: blue)
    4) USB LED: single colour (access/connect: blue)
    5) LAN speed LED (10/100 Mbps: green, 1000 Mbps: orange)
    6) LAN activity LED (access/link: blinking green)
  • CPU / RAM / OS
    Processor: Marvell 88F6707 800 MHz, ARMv7 compliant SOC
    DRAM memory size: 256 MB DDR3
    Flash memory size: 1 Gb
    Operating system: Embedded Linux
  • Power Adapter
    External 40W AC/DC power adapter (fanless), 19V / 2.1A
    AC Input: 100~240V AC, 50~60Hz
    Automatic voltage adjust
    Dimensions: 89.5 x 37 x 26.5 mm (LWH)
    DC Connector: 5.5/2.5mm (outer/inner diameter)
  • Fanless cooling system
    Low noise operating thanks to a fanless cooling design.
    Make sure the NAS device is in a well ventilated area.
    The System also shuts down when the hard disk temperature exceeds 65 °C / 149°F. [2]
  • Accessories
    Quick Installation Guide
    AC Power adapter (40 W) with AC power cord (plug depends on region)
    Ethernet cable, ca. 150 cm
    Driver CDROM with NAS finder software (Windows & Mac) and documentation


  • Web User Interface
    The device settings are made through a web browser on a computer, which is connected to the same local subnet. 12 languages are supported: English, German, French, Spanish, Italian, Dutch, Danish, Russian, Turkish, Chinese (simple+trad.) and Japanese. The OMNINAS Web Interface is particularly user friendly thanks to its simple structure. The OMNINAS Wizard is your guide during the initial setup.
  • Finder Software
    The OMNINAS Finder Software Tool is used to detect the OMNINAS system in the local network (within the same subnet). It can start the Web User Interface in your default browser and can map/unmap the internal and external storages of the OMNINAS to a drive letter of your PC.
  • APPs for mobile devices
    You can use an App to upload and share files from iOS and Android devices like iPhone, iPAD, Android phone and Android tablet.
    Just lock for the appropriate "OMNINAS" app on one of these websites:
    Android: https://play.google.com/store/apps/details?id=com.shuttle.omninas2
    iOS: http://itunes.apple.com/nz/app/omninas/id543929833
  • Networking Services
    Samba Server (SMB file sharing)
    with up to 256 share folders, up to 256 users and up to 256 concurrent connections
    FTP Server (File Transfer Protocol with SSL/TLS support)
    Apple File Protocol (AFP)
    DLNA Media Server
    iTunes Media Server 
    Printer Server (supports USB printers)
    BT download (scheduled and without PC)
    External device sharing (via USB or card reader)
    NTP support for scheduled time synchronization (RTC integrated)
    Wake on LAN (WOL)
  • System Services
    Firmware upgrade (online live update or offline manual update)
    Time-Zone settings
    Factory reset function
    System log report
  • Backup functions
    Quick Auto Copy for external storage connected to front USB (also PTP camera [3]) or card reader
    NAS to USB storage backup (scheduled or immediately)
    NAS to NAS backup (scheduled or immediately)
  • Disk Management
    HDD Spin down timer
    Check Disk
    Disk usage status management
    Disk Format
    SMART information report
  • File Systems
    Internal: XFS
    External: EXT2, EXT3, EXT4, XFS, NTFS, FAT, FAT32
  • System Requirements
    - Workstation OS: MS Windows XP SP3, Mac OS X 10.4, Apple Safari 3.0, 
    Linux kernel 2.6.x or later
    - Smart phone OS: iOS 4.2, Android 2.3 or later
    - Browser: MS Internet Explorer 7.0, Firefox 3.x, Google Chrome, Apple Safari 3.0 or later
    - Router for Internet connection
  • Standby Mode
    After a certain time of inactivity the system will enter power saving (standby) mode.
    This time can be set under: Settings - General - Power Saving Time Setting
    You can select a time from 10 minutes up to 5 hours.
  • Power on/off functions
    Scheduled power on/off - simple configuration for each day of the week
    Power Recovery: Auto restart after power failure
    Wake on LAN (WOL) [4]

Reference values and compliance

  • Transfer Speed [1]
    Read data - from NAS to workstation: up to 80 MB/s
    Write data - from workstation to NAS: up to 60 MB/s
    Maximum number of concurrent connections: 256
  • Low Power Consumption [1]
    Power saving mode (suspend): 5.8 W
    Normal operating (no hard disk access): 11.9 W
  • Environmental Spec
    Operating temperature range: 0~40 °C
    Relative humidity range: 10~90% (non-condensing)
  • CE Compliance
    This device is classed as a technical information equipment (ITE) in class B and is intended for use in living room and office. 
    The CE and WEEE marks approve the conformity by the EU-guidelines:
    • EMC - guideline 2004/108/EC, Directive on Electromagnetic Compatibility
    • LVD - guideline 2006/95/EC, Directive on Low Voltage
    • ErP Lot6 - guideline 2009/125/EC, Directive on ecoconception of Energy related Products
    • RoHS - guideline 2002/95/EC, Directive on Restriction of Hazardous Substances
    • WEEE - guideline 2002/96/EC, Directive on The Waste Electrical and Electronic Equipment
  • Other Compliance
    • CB (IEC 60950-1:2005 (2nd Edition)
    • FCC
    • C-Tick
    • BSMI
    • R&TTE

[1] depending on the test environment
[2] the threshold temperatures are subject to change by firmware update.
The KD20's threshold temperature refers to the "Current internal temperature" provided by the SMART monitoring system. This temperature may be much higher than the "operating/ambient temperature" that is also mentioned in the hard disk specification. The KD20 only supports hard disks with SMART monitoring system and temperature sensor which all available SATA hard disks should support.
[3] Picture Transfer Protocol (PTP) - allows the transfer of images from digital cameras to computers and other peripheral devices without the need of additional device drivers. Modern digital cameras usually support this protocol.
[4] You can enable the Wake on LAN function in Web User Interface: Settings - General - Enable Wake-On-LAN. After Wake on LAN is enabled for your OMNINAS, you can switch off the OMNINAS and turn on over the network by using a WOL (Wake on LAN) application. For proper function, please do not interrupt the power supply from the OMNINAS. You will find the MAC address on the bottom of the OMNINAS device.

© 2020 Shuttle Europe | Legal notice | Contact | Terms and Conditions | Privacy Policy | Sitemap