Hardware:

• Chassis
  Robust black plastic chassis with large rubber feet
  Dimensions: 124 mm (H) x 60 mm (W) x 205 mm (L) = ca. 1.5 litres
  Weight: 550 g
  Kensington Security Slot at the back panel (also called a K-Slot or Kensington lock) as a part of an anti-theft system
• Storage Bay, Hard disk support
  One storage bay (storage drive not included)
  Supports one 8.9 cm (3.5") hard disk drive up to 6 TB capacity (or more)
  Easy screw-free hard disk installation (no tools required).
  Supports hard disk spin-down timer
  Supports check/format disk, SMART information report, disk usage status report
  Hard disks must support SMART temperature feature with temperature sensor
• Network connector / IP setting
  1x Gigabit LAN (RJ45, rear)
  Supports Wake-on-LAN (WOL) [4]
  Supports IEEE P802.3az Energy Efficient Ethernet (EEE)
  IP Configuration: Supports Static IP or Auto IP by DHCP server
  Supports Hostname/Groupname
• Integrated WLAN AP
  Wireless LAN Access Point / Hotspot (can be enabled/disabled)
  IEEE 802.11 b/g/n (max. 54 Mbit/s)
  Encryption methods: WEP 64/128 bits, WPA, WPA2
  Frequency band: 2.4 GHz
  Bandwidth settings: 20 and 40 MHz
• USB Connectors
  1x USB 2.0 (type A, front), supports Auto-Copy function
  1x USB 2.0 (type A, rear)
  Both USB ports support external devices like hard disks, flash drives, 
  printers, digital camera and USB hubs. 
  Memory can be shared to local network.
• Card Reader
  Buillt-in card reader in the front panel
  Supports SD, SDHC and SDXC flash memory cards
  Supports Auto-Copy function
• Buttons (rear)
  Main power button
  Reset button (hole) for admin passwort reset
• LED Indicators
  KS10 comes with six LED indicators with the following behavior:
  1) System LED: dual colour (operating mode/error: blue/red)
  2) HDD LED: dual colour (access/error: blue/red)
  3) SD card reader LED: single colour (access: blue)
  4) USB LED: single colour (access/connect: blue)
  5) LAN speed LED (10/100 Mbps: green, 1000 Mbps: orange)
  6) LAN activity LED (access/link: blinking green)
• CPU / RAM / OS
  Processor: Marvell 88F6707 800 MHz, ARMv7 compliant SOC
  DRAM memory size: 256 MB DDR3
  Flash memory size: 1 Gb
  Operating system: Embedded Linux
• Power Adapter
  External 40W AC/DC power adapter (fanless), 19V / 2.1A
  AC Input: 100~240V AC, 50~60Hz
  Automatic voltage adjust
  Dimensions: 89.5 x 37 x 26.5 mm (LWH)
  DC Connector: 5.5/2.5mm (outer/inner diameter)
• Fanless cooling system
  Low noise operating thanks to a fanless cooling design.
  Make sure the NAS device is in a well ventilated area.
  The System also shuts down when the hard disk temperature exceeds 65 °C / 149°F. [2]
• Accessories
  Quick Installation Guide
  AC Power adapter (40 W) with AC power cord (plug depends on region)
  Ethernet cable, ca. 150 cm
  Driver CDROM with NAS finder software (Windows & Mac) and documentation

Functionality:

• Web User Interface
  The device settings are made through a web browser on a computer, which is connected to the same local subnet. 12 languages are supported: English, German, French, Spanish, Italian, Dutch, Danish, Russian, Turkish, Chinese (simple+trad.) and Japanese. The OMNINAS Web Interface is particularly user friendly thanks to its simple structure. The OMNINAS Wizard is your guide during the initial setup.
• Finder Software
  The OMNINAS Finder Software Tool is used to detect the OMNINAS system in the local network (within the same subnet). It can start the Web User Interface in your default browser and can map/unmap the internal and external storages of the OMNINAS to a drive letter of your PC.
• APPs for mobile devices
  You can use an App to upload and share files from iOS and Android devices like iPhone, iPAD, Android phone and Android tablet.
  Just lock for the appropriate "OMNINAS" app on one of these websites:
  Android: https://play.google.com/store/apps/details?id=com.shuttle.omninas2
  iOS: http://itunes.apple.com/nz/app/omninas/id543929833
• Networking Services
  Samba Server (SMB file sharing)
  with up to 256 share folders, up to 256 users and up to 256 concurrent connections
  FTP Server (File Transfer Protocol with SSL/TLS support)
  Apple File Protocol (AFP)
  DLNA Media Server
  iTunes Media Server 
  Printer Server (supports USB printers)
  BT download (scheduled and without PC)
  External device sharing (via USB or card reader)
  NTP support for scheduled time synchronization (RTC integrated)
  Wake on LAN (WOL)
• System Services
  Firmware upgrade (online live update or offline manual update)
  Time-Zone settings
  Factory reset function
  System log report
• Backup functions
  Quick Auto Copy for external storage connected to front USB (also PTP camera [3]) or card reader
  NAS to USB storage backup (scheduled or immediately)
  NAS to NAS backup (scheduled or immediately)
• Disk Management
  HDD Spin down timer
  Check Disk
  Disk usage status management
  Disk Format
  SMART information report
• File Systems
  Internal: XFS
  External: EXT2, EXT3, EXT4, XFS, NTFS, FAT, FAT32
• System Requirements
  - Workstation OS: MS Windows XP SP3, Mac OS X 10.4, Apple Safari 3.0, 
  Linux kernel 2.6.x or later
  - Smart phone OS: iOS 4.2, Android 2.3 or later
  - Browser: MS Internet Explorer 7.0, Firefox 3.x, Google Chrome, Apple Safari 3.0 or later
  - Router for Internet connection
• Standby Mode
  After a certain time of inactivity the system will enter power saving (standby) mode.
  This time can be set under: Settings - General - Power Saving Time Setting
  You can select a time from 10 minutes up to 5 hours.
• Power on/off functions
  Scheduled power on/off - simple configuration for each day of the week
  Power Recovery: Auto restart after power failure
  Wake on LAN (WOL) [4]

Reference values and compliance

• Transfer Speed [1]
  Read data - from NAS to workstation: up to 80 MB/s
  Write data - from workstation to NAS: up to 60 MB/s
  Maximum number of concurrent connections: 256
• Low Power Consumption [1]
  Power saving mode (suspend): 5.8 W
  Normal operating (no hard disk access): 11.9 W
• Environmental Spec
  Operating temperature range: 0~40 °C
  Relative humidity range: 10~90% (non-condensing)
• CE Compliance
  This device is classed as a technical information equipment (ITE) in class B and is intended for use in living room and office. 
  The CE and WEEE marks approve the conformity by the EU-guidelines:
  • EMC - guideline 2004/108/EC, Directive on Electromagnetic Compatibility
  • LVD - guideline 2006/95/EC, Directive on Low Voltage
  • ErP Lot6 - guideline 2009/125/EC, Directive on ecoconception of Energy related Products
  • RoHS - guideline 2002/95/EC, Directive on Restriction of Hazardous Substances
  • WEEE - guideline 2002/96/EC, Directive on The Waste Electrical and Electronic Equipment
• Other Compliance
  • CB (IEC 60950-1:2005 (2nd Edition)
  • FCC
  • C-Tick
  • BSMI
  • R&TTE

Footnotes:
[1] depending on the test environment
[2] the threshold temperatures are subject to change by firmware update.
The KD20's threshold temperature refers to the "Current internal temperature" provided by the SMART monitoring system. This temperature may be much higher than the "operating/ambient temperature" that is also mentioned in the hard disk specification. The KD20 only supports hard disks with SMART monitoring system and temperature sensor which all available SATA hard disks should support.
[3] Picture Transfer Protocol (PTP) - allows the transfer of images from digital cameras to computers and other peripheral devices without the need of additional device drivers. Modern digital cameras usually support this protocol.
[4] You can enable the Wake on LAN function in Web User Interface: Settings - General - Enable Wake-On-LAN. After Wake on LAN is enabled for your OMNINAS, you can switch off the OMNINAS and turn on over the network by using a WOL (Wake on LAN) application. For proper function, please do not interrupt the power supply from the OMNINAS. You will find the MAC address on the bottom of the OMNINAS device.