Welcome to the world of Shuttle Mini PCsWhy XPCProductsUsagexCommunityWhere to buySupportBusiness AreaPress
Complete Systems|Barebones|XPC Accessories|Newest Products|Product Related News|Discontinued Products|

Discontinued Mainboards

AB30R

AB30R
Socket 478, 400FSB
Intel 845/ICH2 Chipset Slots: AGP, 5x PCI
USB1.1, PC133, ATA100 RAID
6-channel audio (C-Media)
ATX Form Factor



  • Chipset
    Intel '845 for Pentium 4 and Celeron Processors for socket 478
    Memory Control Hub (MCH): Intel 82845 with passive cooler
    I/O Control Hub 2 (ICH2): Intel 82801BA
    Firmware Hub (FWH): 4 MBit Flash EEPROM
  • Socket 478 CPU support
    Intel Pentium 4 Processor (Willamette or Northwood) and P4 Celeron
    with 400MHz FSB (100MHz Quad-Datarate process)
    successfully tested with: P4 Celeron up to 1,8 GHz, P4 (Willamette 256KB Cache) up to 2,2GHz and
    P4 (Northwood 400MHz FSB) up to 2,4GHz
    Note: CPUs with Prescott core are not supported!
    Usually, there is no need to configure the processor.
    In BIOS you can set up the following parameters manually:
    - FSB BUS adjustment infinitely from 100 up to 166MHz adjustable
    - Vcore-CPU voltage from 1,10 up to 1,85V
    - Multiplier 9x up to 23x
  • Expansion slots
    1 x AGP slot supports 4X mode
    5 x 32 Bit PCI
  • Onboard IDE Controller
    2 Channel Enhanced PCI IDE
    for up to 4 IDE devices
    supports UltraDMA/100
    incl. ATA-100 channel
  • IDE RAID Controller
    Chip: Promise 265R, supports RAID mode 0 and 1 (not simultaneously)
    with detailed manual and additional ATA-100 cable
  • Integrated Multi Channel Hardware Audio Function:
    supports 5.1 speaker mode, C3DX Positional Audio in 6 channel speaker mode
    HRTF-3D Positional Audio, supports Direct Sound 3D and A3D interface
    Legacy SBPRO compatible
    Connectors on the backpanel: 
    line-in, line-out, microphone, MIDI/gameport, line in/out
    Connectors on the bracket: 
    for bass/center, bracket included
    By multi channel: Line-Out = front, Line-In = rear and onboard connectors for bass/center
    More line-ins on the mainboard  Audio-in for CD-ROM and AUX.
  • Backpanel connectors
    1 x PS/2 Mouse
    1 x PS/2 Keyboard
    1 x Parallel (SSP/EPP/ECP)
    2 x Serial (16550 compatible, Fifo)
    2 x USB (two further onboard)
    Audio: line-in, line-out, microphone, MIDI/gameport
  • Onboard connectors
    1 x Floppy drive (up to 2,88 MB)
    2 x USB (additional)
    1 x Infrared (COM2 can be used for infrared communication, IrDA-adapter not included in delivery)
    1 x WOL (Wake on Lan)
    4 x Fan
  • Memory
    3 x 168-Pin DIMM-Socket
    supports PC133 SDRAM modules with sizes of 16, 32, 64, 128, 256, 512 and 1024MB
    with 100 or 133MHz clock frequency up to 3 GB capacity
  • Hardware monitoring
    CPU temperature, voltages and fan revolution
  • Power Management
    ACPI Version 1.0 (Advanced Configuration and Power Interface)
    supports power saving mode: S1 (Snoop), S3 (Suspend to RAM), S5 (Soft-Off)
    On/Off button with two functions: Suspend mode / Soft-off
  • BIOS
    Award V6.0PG  PnP Green BIOS
    4 MBit Flash EPROM in Intel Firmwarehub (FWH)
  • ATX power supply connector
    Standard 20-Pin-ATX power supply connectors
    Additional 4-Pin connectors for 12V
    Additional 6-Pin connectors for 3,3 and 5V
  • Accessories
    Mainboard with passive Northbridge cooler, IDE cable (ATA-100), floppy cable, bracket adapter for Subwoofer speaker, detailed manual, driver CD-ROM
    AB30R also contains an additional IDE cable for the onboard IDE RAID controller

  • Form Factor
    ATX: 30,5 x 22 cm only.

sendprint
top
Search
Further Information
Shuttle Newsletter

Shuttle at Work


Out at sea - in the library or even as a collectors' item. The Shuttle XPC can be used everywhere! See the Shuttle XPC in action.
more
The K-Series is Shuttle’s most cost-effective Mini-PC model range. The K-Series is ideal for the office and simple daily routine applications.
Back Next
2009
14.10.2009 11:14:36