XPC SB75G2

In order to install Windows 2000 or Windows XP RAID drivers on theSB75G2, a floppy drive and floppy disk with the RAID driver is essential. Before you start you will need to create a Intel RAID Driver Floppy Disk: 
1. On a system running Windows, insert Motherboard Driver CD. 
2. Insert a blank floppy diskette into the floppy drive. 
3. Double-click on the D:\Intel\Raid\F6 install\F6 install.exe and answer all prompts presented (Assumes your CD ROM Drives label is D.) 
4. When installation is complete, your floppy should contain the following files: iaStor.cat, iaStor.inf, iaStor.cat, License.txt, readme.txt and TXTSETUP.oem. Go into the BIOS setup utility and enable Drive A and Onboard FDC Controller. 

Enable Drive A.

Enable Onboard FDC Controller.  

Begin Windows installation

Press F6 function key when the Raid setup message string come up.

 
Press S key to select RAID driver.

Insert the floppy disk you just made into the floppy drive.

Select the driver for your operating system.

After the driver has been installed, press Enter to continue installing Windows.