|
Mainboard ST62 Note: Mainboard FT62 only available in conjunction with XPC ST62K. - Chipset:
Northbridge ATI Radeon 9100 IGP (RS300) + Southbridge IPX150 FSB: 800/533/400MHz - Processor support:
Socket 478 CPU supports Intel Pentium 4 Prozessor / Celeron with 800, 533 or 400MHz FSB ( CPUs with "old" Willamette core are not supported , Prescott and Northwood are supported) - Expansion slots:
1 x 32 Bit/33MHz PCI - Parallel-ATA-Controller
Onboard IDE Controller ATA100 supports up to four IDE devices - Sound-Controller:
Onboard Realtek 650F 6-channel sound Connectors on the backpanel: bass/center, line-in (rear out), line-out (front out), optical SPDIF in/out Connectors on the frontpanel: microphone, line-in, line-out More line-ins on the mainboard for SPDIF, CD-ROM and AUX. - Networking:
Fast Ethernet: 10/100 MBit/s with RJ45 connector - Backpanel connectors:
1 x PS/2 Mouse 1 x PS/2 Keyboard 1 x Serial Port 1 1 x VGA Port 1 x RJ45 LAN 1 x TV-OUT S-Video (adapter for composite included in delivery) 2 x USB 2.0 ( 2X frontpanel, 2X backpanel, 2X on board, total 6) 1 x Firewire (1394 Port) Audio: bass/center, line-in (rear out), line-out (front out), optical SPDIF in/out 1 x optional parallel port (additional adapter necessary) - Onboard-connectors:
2 x IDE (ATA-100) 2 x USB 2.0 (2X frontpanel, 2X backpanel, 2X onboard, total 6) 1 x SPDIF input is led to the outside with a connecting cable 1 x CDROM Audio-in 1 x Audio AUX 1 x Parallel port (onboard, adapter necessary) 1 x Infrared interface 3 x Fan connector - Memory:
2 x 184-Pin for Dual Channel PC1600 (DDR200), PC2100 (DDR266), PC2700 (DDR333) or PC3200 (DDR400) unbuffered DDR SDRAM memory with 100, 133, 166 or 200MHz clock frequency up to 2GB capacity - Hardware monitoring
CPU temperature, voltage and fan revolution - Power Management
ACPI Version 1.0 (Advanced Configuration and Power Interface) supports power saving modes: S1 (Snoop), S3 (Suspend to RAM), S4 (Suspend to DISK), S5 (Soft-Off) On/Off button with two functions: Suspend mode/ soft out# - BIOS
Award V6.0PG PnP Green BIOS stored in 4MBit Flash memory chip - Power supply connector
6-pin power connector 12V DC for external fanless 180W power adaptor - Form Factor
Flex/Micro-ATX: 17x27 cm - Conformity
This device is classed as a technical information equipment (ITE) in class B and is intended for use in living room and office. The CE-mark approves the conformity by the EU-guidelines: - EMV-guideline 89/336/EWG electromagnetic tolerance - LVD-guideline 73/23/EWG use of electric devices within certain voltage-limits
Navigation |
|
|