XPC ST62K

     

Note: Mainboard FT62 only available in conjunction with XPC ST62K.

• Chipset:
  Northbridge ATI Radeon 9100 IGP (RS300) + Southbridge IPX150 
  FSB: 800/533/400MHz 
• Processor support:
  Socket 478 CPU supports
  Intel Pentium 4 Prozessor / Celeron with 800, 533 or 400MHz FSB
  ( CPUs with "old" Willamette core are not supported , Prescott and Northwood are supported)
• Expansion slots:
  1 x 32 Bit/33MHz PCI
• Parallel-ATA-Controller
  Onboard IDE Controller ATA100
  supports up to four IDE devices
• Sound-Controller:
  Onboard Realtek 650F 6-channel sound
  Connectors on the backpanel: bass/center, line-in (rear out), line-out (front out), optical SPDIF in/out
  Connectors on the frontpanel: microphone, line-in, line-out
  More line-ins on the mainboard for SPDIF, CD-ROM and AUX.
• Networking:
  Fast Ethernet: 10/100 MBit/s with RJ45 connector
• Backpanel connectors:
  1 x PS/2 Mouse
  1 x PS/2 Keyboard
  1 x Serial Port 1
  1 x VGA Port
  1 x RJ45 LAN
  1 x TV-OUT S-Video (adapter for composite included in delivery)
  2 x USB 2.0 ( 2X frontpanel, 2X backpanel, 2X on board, total 6)
  1 x Firewire (1394 Port)
  Audio: bass/center, line-in (rear out), line-out (front out), optical SPDIF in/out
  1 x optional parallel port (additional adapter necessary)
• Onboard-connectors:
  2 x IDE (ATA-100)
  2 x USB 2.0 (2X frontpanel, 2X backpanel, 2X onboard, total 6)
  1 x SPDIF input is led to the outside with a connecting cable
  1 x CDROM Audio-in
  1 x Audio AUX
  1 x Parallel port (onboard, adapter necessary)
  1 x Infrared interface
  3 x Fan connector
• Memory:
  2 x 184-Pin for Dual Channel PC1600 (DDR200), PC2100 (DDR266), PC2700 (DDR333) or PC3200 (DDR400)
  unbuffered DDR SDRAM memory with 100, 133, 166 or 200MHz clock frequency up to 2GB capacity 
• Hardware monitoring
  CPU temperature, voltage and fan revolution
• Power Management
  ACPI Version 1.0 (Advanced Configuration and Power Interface)
  supports power saving modes: S1 (Snoop), S3 (Suspend to RAM), S4 (Suspend to DISK), S5 (Soft-Off)
  On/Off button with two functions: Suspend mode/ soft out#
• BIOS
  Award V6.0PG PnP Green BIOS
  stored in 4MBit Flash memory chip
• Power supply connector
  6-pin power connector 12V DC for external fanless 180W power adaptor
• Form Factor
  Flex/Micro-ATX: 17x27 cm
• Conformity
  This device is classed as a technical information equipment (ITE) in class B and is intended for use in living room and office. The CE-mark approves the conformity by the EU-guidelines:
  - EMV-guideline 89/336/EWG electromagnetic tolerance
  - LVD-guideline 73/23/EWG use of electric devices within certain voltage-limits