XPC SN41G2 / SN41G2V2

Mainboard FN41 only available in conjunction with XPC SN41G2

• Chipset:
  NVidia nForce2 (Crush 18G)
  Northbridge: IGP (Integrated graphics processor)
  Southbridge: MCP-T (Media and Communications Processor)
• Processor-Support
  Socket 462 (Socket A) CPU support
  AMD Athlon XP and Duron processor for socket A with 333/266/200MHz FSB
  supports also Athlon XP with Barton-core up to 3000+
  FSB infinitely adjustable: 100...200MHz (in 1 MHz-steps)
  Burn Proof CPU protection only for AthlonXP  (automatic power off if overheated)
  the new versionSN41G2V2 (with mainboard FN41 v3.1) supports also Barton 3200+ with 400FSB
• Expansion Slots:
  1 x AGP (v3.0) slot supports 8X and 4X mode
  Important Note: AGP-slot supports only 1,5V graphics cards
  1 x 32 Bit PCI (v2.2)
  AGP- and PCI-Slot are designed for simultaneous use
• Graphics-Controller with 2 VGA-outs
  Northbridge with integrated GeForce4 MX graphics processor
  up to 128MB Shared Memory (UMA)
  Highend-256Bit-2D/3D-accelerator
  nView Dual-Display-architecture
  integrated 300MHz D/A-converter
  max. resolution: 1920x1440
• TV-out
  S-Video-connector, adapter for composite-standard included in delivery
  maximum resolution 1024x768 at 50 bzw. 60 Hz
• IDE-Interface
  Onboard IDE Controller with 2x ATA133-connectors (incl. two cables)
• Multimedia:
  AC97 v2.2 Realtek ALC650 sound function with 6-channel-Support
  Connectors on the backpanel: bass/center, line-out (front-out), rear-out
  Connectors on the frontpanel: microphone and line-out
  onboard: Audio-in for CD-ROM and AUX.
• Networking:
  10/100MBit LAN with RJ45-connector on the backpanel
  Realtek 8201BL chipset
• 1394 Firewire
  Firewire-Controller Realtek 8801 with 3x 1394 connectors
  supports 400/200/100 Mbit/s transfer rate
• Backpanel-connectors:
  2 x VGA
  1 x TV-connector (S-Video, per Adapter to Composite)
  1 x PS/2-Mouse
  1 x PS/2-Keyboard
  1 x Serial
  2 x USB 2.0 (4 more onboard)
  2 x Firewire (IEEE1394, one more connector onboard)
  1 x  Network RJ45
  Audio: 3 connectors for  6-channel operation (bass/center, front, rear)
  
• Onboard-connectors:
  1 x Floppy drive (up to 2,88 MB)
  4 x USB 2.0 (two more on the backpanel)
  1 x SPDIF-out
  1 x Infrared
  1 x Firewire (IEEE1394, two more on the backpanel)
  2 x Audio frontpanel connectors (microphone and line-out)
  1 x CDROM Audio-in
  3 x Fan (CPU, AGP, Case)
  1 x Parallelport
• Memory:
  2 x 184-Pin for PC3200 (DDR400), PC2700 (DDR333), PC2100 (DDR266) or PC1600 (DDR200) unbuffered DDR SDRAM memory
  with 200, 166, 133 or 100MHz clock frequency up to 2GB capacity
  Caution: DDR400 is only supported in conjunction with an additional (plugged-in) AGP-graphics card
  no support of buffered or ECC-modules
• Hardware-monitoring
  CPU-temperature, system voltage and fan revolution
  AutoGuardian-Function for revolution regulating
• Power Management
  ACPI Version 1.0 (Advanced Configuration and Power Interface)
  supports power saving modes: S1 (Snoop), S3 (Suspend to RAM), S4 (Suspend to DISK), S5 (Soft-Off)
  On/Off-button with two functions: Suspend-mode / soft-off
  Power on after power failure
• BIOS
  Award V6.0PG PnP Green BIOS
  stored in 2MBit Flash-memory chip
• ATX-power supply connector
  SN41G2: 200W, SN41G2V2: Silent-X 250W Version Info
  Standard 20-Pin-ATX-power supply connector + 4-pins
• Form Factor
  Flex/MicroATXt: 25,4 x 18,5 cm
• Conformity
  This device is classed as a technical information equipment (ITE) in class B and is intended for use in living room and office. The CE-mark approves the conformity by the EU-guidelines:
  - EMV-guideline 89/336/EWG electromagnetic tolerance
  - LVD-guideline 73/23/EWG use of electric devices within certain voltage-limits