Path: HomeProductsXPCSN41G2/V2Mainboard FN41
XPC SN41G2 / SN41G2V2
Mainboard FN41 Mainboard FN41 only available in conjunction with XPC SN41G2 - Chipset:
NVidia nForce2 (Crush 18G) Northbridge: IGP (Integrated graphics processor) Southbridge: MCP-T (Media and Communications Processor) - Processor-Support
Socket 462 (Socket A) CPU support AMD Athlon XP and Duron processor for socket A with 333/266/200MHz FSB supports also Athlon XP with Barton-core up to 3000+ FSB infinitely adjustable: 100...200MHz (in 1 MHz-steps) Burn Proof CPU protection only for AthlonXP (automatic power off if overheated) the new versionSN41G2V2 (with mainboard FN41 v3.1) supports also Barton 3200+ with 400FSB - Expansion Slots:
1 x AGP (v3.0) slot supports 8X and 4X mode Important Note: AGP-slot supports only 1,5V graphics cards 1 x 32 Bit PCI (v2.2) AGP- and PCI-Slot are designed for simultaneous use - Graphics-Controller with 2 VGA-outs
Northbridge with integrated GeForce4 MX graphics processor up to 128MB Shared Memory (UMA) Highend-256Bit-2D/3D-accelerator nView Dual-Display-architecture integrated 300MHz D/A-converter max. resolution: 1920x1440 - TV-out
S-Video-connector, adapter for composite-standard included in delivery maximum resolution 1024x768 at 50 bzw. 60 Hz - IDE-Interface
Onboard IDE Controller with 2x ATA133-connectors (incl. two cables) - Multimedia:
AC97 v2.2 Realtek ALC650 sound function with 6-channel-Support Connectors on the backpanel: bass/center, line-out (front-out), rear-out Connectors on the frontpanel: microphone and line-out onboard: Audio-in for CD-ROM and AUX. - Networking:
10/100MBit LAN with RJ45-connector on the backpanel Realtek 8201BL chipset - 1394 Firewire
Firewire-Controller Realtek 8801 with 3x 1394 connectors supports 400/200/100 Mbit/s transfer rate - Backpanel-connectors:
2 x VGA 1 x TV-connector (S-Video, per Adapter to Composite) 1 x PS/2-Mouse 1 x PS/2-Keyboard 1 x Serial 2 x USB 2.0 (4 more onboard) 2 x Firewire (IEEE1394, one more connector onboard) 1 x Network RJ45 Audio: 3 connectors for 6-channel operation (bass/center, front, rear) - Onboard-connectors:
1 x Floppy drive (up to 2,88 MB) 4 x USB 2.0 (two more on the backpanel) 1 x SPDIF-out 1 x Infrared 1 x Firewire (IEEE1394, two more on the backpanel) 2 x Audio frontpanel connectors (microphone and line-out) 1 x CDROM Audio-in 3 x Fan (CPU, AGP, Case) 1 x Parallelport - Memory:
2 x 184-Pin for PC3200 (DDR400), PC2700 (DDR333), PC2100 (DDR266) or PC1600 (DDR200) unbuffered DDR SDRAM memory with 200, 166, 133 or 100MHz clock frequency up to 2GB capacity Caution: DDR400 is only supported in conjunction with an additional (plugged-in) AGP-graphics card no support of buffered or ECC-modules - Hardware-monitoring
CPU-temperature, system voltage and fan revolution AutoGuardian-Function for revolution regulating - Power Management
ACPI Version 1.0 (Advanced Configuration and Power Interface) supports power saving modes: S1 (Snoop), S3 (Suspend to RAM), S4 (Suspend to DISK), S5 (Soft-Off) On/Off-button with two functions: Suspend-mode / soft-off Power on after power failure - BIOS
Award V6.0PG PnP Green BIOS stored in 2MBit Flash-memory chip - ATX-power supply connector
SN41G2: 200W, SN41G2V2: Silent-X 250W Version Info Standard 20-Pin-ATX-power supply connector + 4-pins - Form Factor
Flex/MicroATXt: 25,4 x 18,5 cm - Conformity
This device is classed as a technical information equipment (ITE) in class B and is intended for use in living room and office. The CE-mark approves the conformity by the EU-guidelines: - EMV-guideline 89/336/EWG electromagnetic tolerance - LVD-guideline 73/23/EWG use of electric devices within certain voltage-limits
Print version of this page: http://eu.shuttle.com/fn41.htm
Shuttle Computer - European Headquarters - All rights reserved - Date:
30.4.2008
|