|
Mainboard FB65 Note: Mainboard only available in conjunction with XPC SB65G2! - Chipset:
Intel 865PE/ICH5 USB: 800/533/400MHz Socket 478 CPU support Intel Pentium 4 processor for socket 478 with 800, 533 and 400MHz FSB (Pentium 4 with Northwood core are supported, Willamette and Prescott are not supported) - Expansion slots :
1 x AGP (8X) 1 x 32 Bit PCI (v2.2) - IDE-Controller
Onboard IDE Controller ATA100 supports up to four IDE drives - SATAController
Onboard Serial ATA150 Controller - Multimedia:
AC97 2.2 6-Kanal Sound Connectors on the backpanel: 6 Channel audio output (analog: bass/center, rear, front), optical SPDIF in/out Connectors on the frontpanel: microphone, line-in, line-out More line-ins on the mainboard for SPDIF, CD-ROM and AUX. - Networking:
Ethernet: 100/10 Mbps, Realtek 8100B - Backpanel connections:
1 x PS/2 Mouse 1 x PS/2 Keyboard 1 x Serial 1 x RJ45 Ethernet 100/10 Mbps 4 x USB 2.0 (total 8) 1 x Firewire Audio: Connectors on the backpanel: 6-Channel Audio-out (analog: bass/center, rear, front) optical SPDIF in/out - Onboard connections:
1 x Floppy drive (up to 2,88 MB) 2 x IDE (ATA-100) 2 x USB 2.0 (for internal use, 4 more on backpanel, as well as 2 on the frontpanel > total 8) 1 x SPDIF (in/out) 2 x Audio frontpanel connectors (microphone and line-out) 1 x CDROM Audio-in 1 x AUX 1 x Infrared interface 3 x Fan (CPU, AGP, case) - Memory:
2 x 184-Pin for Dual Channel PC1600 (DDR200), PC2100 (DDR266), PC2700 (DDR333) or PC3200 (DDR400) unbuffered DDR SDRAM memory with 100 or 200MHz clock frequency up to 2GB capacity now with "Turbo mode" (in BIOS-Setup) for faster memory access - Hardware monitoring:
CPU temperature, voltage and fan revolution - Power Management:
ACPI Version 1.0 (Advanced Configuration and Power Interface) supports power saving modes: S1 (Snoop), S3 (Suspend to RAM), S4 (Suspend to DISK), S5 (Soft-Off) On/Off button with two functions: Suspend mode/ soft out Power on after power failure - BIOS:
Award V6.0PG PnP Green BIOS stored in 4MBit Flash memory chip - ATX-power supply connector:
Standard 20-Pin-ATX-power supply connector + 4-Pins - Form Factor:
Flex-ATX: 254mm x 185mm - Conformity:
This device is classed as a technical information equipment (ITE) in class B and is intended for use in living room and office. The CE-mark approves the conformity by the EU-guidelines: - EMV-guideline 89/336/EWG electromagnetic tolerance - LVD-guideline 73/23/EWG use of electric devices within certain voltage-limits
Navigation |
|
|