XPC SB52G2

Note: Mainboard only available in conjunction with XPC SB52G2!

• Chipset:
  Intel 845GV/ICH4
  BUS: 533/400MHz
  Socket 478 CPU support
  (Pentium 4 with Northwood core is supported, Willamette and Prescott are not supported)
  Intel Pentium 4 processor for socket 478 with 533 and 400MHz FSB
  FSB infinitely adjustable: 100...165MHz (in 1 MHz steps)
  CPU multiplier: automatically, or adjustable from 8 to 50x
• Expansion slots:
  2 x 32 Bit PCI (v2.2)
• IDE-Controller
  Onboard IDE Controller ATA100
  supports up to four IDE disk drive
• Multimedia:
  AC97 2.2 6 Channel sound
  Connectors on the backpanel: bass/center, line-in (rear out), line-out (front out), optical SPDIF out
  Connectors on the frontpanel: microphone, line-out
  More line-ins on the mainboard for SPDIF, CD-ROM and AUX.
• Dual LAN:
  IEEE 802.3u, conforming to 100BaseT
  Ethernet 1: 1000/100/10 Mbps, Intel 82540EM
  Ethernet 2: 100/10 Mbps, Intel 82551QM
• Backpanel connectors:
  1 x PS/2 Mouse
  1 x PS/2 Keyboard
  1 x Serial
  1 x RJ45 Ethernet 1000/100/10 Mbps
  1 x RJ45 Ethernet 100/10 Mbps
  2 x USB 2.0 (total 6)
  Audio: bass/center, line-in (rear out), line-out (front out), optical SPDIF out
• Onboard connectors:
  1 x Floppy drive (up to 2,88 MB)
  2 x IDE (ATA-100)
  4 x USB 2.0 (two for the frontpanel, two more on the backpanel, total 6)
  1 x SPDIF-in
  2 x Audio frontpanel connectors (microphone and line-out)
  1 x CDROM Audio-in
  1 x AUX
  1 x Infrared interface
  3 x Fans (CPU, AGP, case)
• Memory:
  2 x 184-Pin for PC1600 (DDR200) or PC2100 (DDR266) unbuffered DDR SDRAM memory
  with 100 or 133MHz clock frequency up to 2GB capacity
• Hardware monitoring
  CPU temperature, voltage and fan revolution
• Power Management
  ACPI Version 1.0 (Advanced Configuration and Power Interface)
  supports power saving modes: S1 (Snoop), S3 (Suspend to RAM), S4 (Suspend to DISK), S5 (Soft-Off)
  On/Off button with two functions: Suspend mode/ soft off
  Power on after power failure
• BIOS
  Award V6.0PG PnP Green BIOS
  stored in 4MBit Flash memory chip
• ATX power supply connector
  Standard 20-Pin-ATX power supply connector + 4-Pins
• Form Factor
  Micro-ATX: 254mm x 185mm
• Conformity
  This device is classed as a technical information equipment (ITE) in class B and is intended for use in living room and office. The CE-mark approves the conformity by the EU-guidelines:
  - EMV-guideline 89/336/EWG electromagnetic tolerance
  - LVD-guideline 73/23/EWG use of electric devices within certain voltage-limits