XPC SB51G

Information: This mainboard is only in conjunction with the SB51G available.

• Chipset:
  Intel 845GE/ICH4
  BUS: 400/533MHz
  Socket 478 CPU support
  Intel Pentium 4 processor for socket 478 with 400 and 533MHz FSB
  Pentium 4 processors with Prescott core are not supported.
  FSB infinitely adjustable: 100...166MHz (in 1 MHz steps)
  CPU multiplier automatically, or adjustable from 8 to 24x
• Expansion slots:
  1 x AGP (v2.0) slots supports 4X mode
  Important note: AGP slot supports 1,5V mode only
  1 x 32 Bit PCI (v2.2)
  AGP- and PCI slot for simultanous use!
• IDE-Controller
  Onboard IDE Controller ATA100
  supports up to four IDE disk drives
• Multimedia:
  AC97 2.2 6 Channel sound
  Connector on the backpanel: line-in, line-out, microphone
  More line-ins on the mainboard audio-in for CD-ROM and AUX.
• Networking:
  10/100MBit LAN
  Realtek 8100B chipset
• Backpanel connectors:
  1 x PS/2 Mouse
  1 x PS/2 Keyboard
  2 x Serial
  2 x USB 2.0 (4 more onboard)
  2 x Firewire (IEEE1394)
  Audio: line-in, line-out, microphone, SPDIF-in
• Onboard connections:
  1 x Floppy drive (up to 2,88 MB)
  4 x USB 2.0 (two further on backpanel)
  1 x SPDIF
  2 x Audio frontpanel connectors (microphone and line-out)
  1 x Bass/Center Audio-out
  2 x CDROM Audio-in
  1 x Audio (AUX)
  3 x Fan (CPU, AGP, case)
• Memory:
  2 x 184-Pin for PC1600 (DDR200), PC2100 (DDR266) or PC2700 (DDR333) unbuffered DDR SDRAM memory
  with 100, 133MHz or 166MHz clock frequency up to 2GB capacity
  DDR333 requires a processor with 533MHz FSB
• Hardware monitoring:
  CPU temperture, voltage and fan revolution
• Power Management
  ACPI Version 1.0 (Advanced Configuration and Power Interface)
  supports power saving modes: S1 (Snoop), S3 (Suspend to RAM), S4 (Suspend to DISK), S5 (Soft-Off)
  On/Off button with two functions: Suspend-mode / soft off
  Power on after power failure
• BIOS
  Award V6.0PG PnP Green BIOS
  stored in 4MBit Flash memory chip
• ATX-power supply connector
  Standard 20-Pin-ATX-power supply connector + 4-pins
• Form Factor
  Micro-ATX: 254mm x 185mm
• Conformity
  This device is classed as a technical information equipment (ITE) in class B and is intended for use in living room and office. The CE-mark approves the conformity by the EU-guidelines:
  - EMV-guideline 89/336/EWG electromagnetic tolerance
  - LVD-guideline 73/23/EWG use of electric devices within certain voltage-limits