• Chassis
    Black aluminium chassis
    Front panel: glossy plastic with horizontal line textures
    Storage bays: 1 x 5.25" (external), 2 x 3.5" (1x internal, 1x external)
    Using the optional accessory PHD3 two 2.5" drives
    can be installed into one 3.5" bay.
    Front doors for I/O ports and storage drives
    Kensington Security Slot at the back panel (also called K-Slot
    or Kensington lock) as a part of an anti-theft system
    Dimensions: 33.2 x 21,6 x 19.8 cm (LWH), 14.2 litre
    Weight: 3.5 kg net / 5.0 kg gross
  • Mainboard / Chipset
    Shuttle "FH170", Shuttle Form Factor
    proprietary design for XPC cube Barebone SH170R6
    Dimensions: 270 x 195 mm
    Chipset: Intel® H170 Chipset
    (Intel® DH82H170 PCH, code name "Sunrise Point")
    Platform Controller Hub (PCH) as Single-Chip-Solution
    Solid Capacitors for sensitive areas provide excellent
    heat resistance for enhanced system durability
  • BIOS
    AMI BIOS, SPI Interface, 32 MBit Flash-ROM with SPI interface
    Supports PnP, ACPI 3.0, Hardware Monitoring
    Supports Unified Extensible Firmware Interface (UEFI)
    Supports boot up from external USB flash memory
  • Power supply
    Built-in 300 Watt mini switching power supply (Shuttle PC61J)
    AC input voltage: supports 100~240V, 50~60 Hz
    80 PLUS® Bronze compliant: the PSU provides at least
    82/85/82% of efficiency at 20/50/100% of load.
    Active PFC circuit (Power Factor Correction)
    ATX main power connectors: 2x10 and 2x2-pin
    Graphics power connector: 6-pin
    Other connectors: 4x SATA, 2x Molex, 1x Floppy
  • Operation System
    This system comes without operating system.
    It is compatible with Windows 10 / 8.1 / 7 and Linux.- 64 bit.
    Note: Windows 7 and 8.1 is only supported in combination with the 6th generation Intel Core processors "Skylake".
    Additional note on Windows 7 see [7]
  • Processor support
    Socket LGA 1151 (H4) supports
    Intel Core i7 / i5 / i3, Pentium and Celeron processors
    - 6th generation, code name "Skylake"
    - 7th generation, code name "Kaby Lake" [8]
    Maximum supported processor power consumption (TDP) = 95W
    14nm process technology, up to 8 MB of L3 cache
    Not compatible with Intel Xeon E3 V5 processors for socket LGA1151 and processors with the older Socket LGA 1150.
    Does not support the unlock-function of Intel K-Series processors.
    The processor integrates PCI-Express, memory controller
    and the graphics engine on the same die (performance features 
    depending on processor type)
    Please refer to the support list for detailed processor support information at global.shuttle.com.
  • Processor cooling
    Shuttle I.C.E. (Integrated Cooling Engine)
    Advanced I.C.E. Heatpipe technology with 3 pipes
    Temperature controlled 92 mm fan
    SilentX cooling and noise reduction technology with Active Airflow
  • Memory support
    4 x 288-pin slots
    Supports DDR4-2133 memory (PC4-17066) at 1.2V
    Supports 2+2 Dual Channel mode
    Supports max. 16 GB per DIMM, maximum total size of 64 GB
  • Integrated Graphics
    The features of the integrated Intel HD graphics function 
    depend on the processor type used.
    Supports DirectX 12, OGL 5.x, OCL 2.x
    The PC features three digital video outputs [6]:
    - HDMI v1.4 (supports 1080p/60 and 2160p/30)
    - 2x DisplayPort v1.2 (support 1080p/60 and 2160p/60)
    Supports displays with 4K Ultra HD resolution at 3840 x 2160 [3]
    Supports three independent FullHD displays with the integrated graphics function
    Supports more displays in combination with a discrete graphics card [2]
    Supports Blu-ray (BD) playback with HDCP content protection
    Supports multi-channel digital audio over the same cable
    Maximum shared memory of 512 MB
  • PCIe Expansion Slots
    1x PCI-Express x16 v3.0 slot (PEG, for graphics cards only)
    1x PCI-Express x4 v3.0 slot
    This XPC supports dual-slot (double-width) graphics cards -
    in this case the second PCI-Express slot will be occupied.
    Graphics power connector: 6-pin
  • M.2 SSD slot
    The M.2 2280 BM slot provides the following interfaces:
    - PCI-Express Gen. 3.0 X4 (max. 32 Gbps), supports NVMe
    - SATA v3.0 (max. 6 Gbps)
    It supports M.2 cards with a width of 22 mm
    and a length of 42, 60 or 80 mm (type 2242, 2260, 2280).
    Supports M.2 SSDs with SATA or PCI-Express interface
  • Mini PCIe Slot
    Mini-PCIe Half-Size slot
    with PCIe 2.0 and USB 2.0 interface
    supports one optional Wireless Network (WLAN) card
  • 7.1-Channel HD audio
    7.1 channel High Definition Audio with Realtek ALC892 codec
    Analog: line-out (7.1-ch), line-in, microphone, AUX input (onboard)
    Digital Audio via HDMI and DisplayPort outputs
  • Gigabit LAN
    Intel i219LM PHY connected to the MAC of the processor
    Supports 10 / 100 / 1.000 MBit/s operation
    Supports WAKE ON LAN (WOL)
    Supports network boot by Preboot eXecution Environment (PXE)
  • SATA connectors
    The mainboard provides six Serial-ATA 3.0 interfaces, max. 6 Gbps supported
    4x Serial ATA connector onboard
    1x External Serial ATA (eSATA) connector at the back panel
    1x M.2 slot onboard for flash memory cards
    Supports Intel Rapid Storage Technology (RST, Raid 0/1/5/10, JBOD)
  • Front Panel Connectors and Buttons
    Microphone input
    Headphone output (line-out)
    2x USB 3.0
    2x USB 2.0 (1x Fast charge port with up to 2A) [4]
    Power button
    Power indicator (blue LED)
    Hard disk drive indicator (yellow LED)
  • Back Panel Connectors
    HDMI v1.4
    2x DisplayPort v1.2 [5]
    6x USB 3.0
    GigaBit LAN (RJ45)
    External Serial ATA (eSATA 6 Gb/s)
    7.1-ch Audio line-out (2x rear/front, bass/center, surround/back)
    Audio Line-in
    Clear CMOS button
    Optional: serial port RS-232 (Accessory: H-RS232)
    3x perforation for optional WLAN antennas
  • Other Onboard Connectors
    2x USB 2.0 (2x 5-pin)
    1x RS232 (2x 5-pin) for optional accessory H-RS232
    2x fan connectors (4 pin), one connector is occupied
    Low Pin Count header (LPC, 2x 10 pin, 2 mm pitch size)
    Occupied front connectors: USB 3.0, USB2.0, audio, power buttons, LEDs
  • Included Accessories
    Multi-language XPC Installation Guide (EN, DE, FR, ES, JP, KR, SC, TC)
    32/64-bit driver disk
    2x Serial ATA cables
    AC Power Cord (with protective-earth contacts)
    Heatsink Compound
    Protector cap for the CPU socket (do not use if heat-pipe or fan is mounted)
    Bag with screws
  • Optional Accessories
    PHD3: 3.5" to 2.5" adapter
    H-RS232: Backpanel COM port adapter for RS232 serial interface
    WLN-C: Wireless LAN 802.11n module with external antennas
    PC63J: 500W power supply, 80 PLUS® Silver
  • Environmental Spec
    Operating temperature range: 0~40°C
    Relative humidity range: 10~90% (non-condensing)
  • Certifications / Compliance::
    EMI: FCC, CE, BSMI, C-Tick
    Safety: ETL, CB, BSMI
    Other: RoHS, Energy Star, ErP
    This device is classed as a technical information equipment (ITE) in class B and is intended for use in living room and office. The CE-mark approves the conformity by the EU directives:
    (1) 2004/108/EC relating to electromagnetic compatibility (EMC),
    (2) 2006/95/EC relating to Electrical Equipment designed for use within certain voltage limits (LVD),
    (3) 2009/125/EC relating to ecodesign requirements for energy-related products (ErP)

Notes:

[1] Overclocking Warning
Please note there is a certain risk involved with overclocking, including adjusting the settings in the BIOS or using third-party overclocking tools. Overclocking may affect your system stability or even cause damage of the components and devices of your system. It is done at your own risk and expense. Shuttle cannot be held responsible for possible damage caused by overclocking.
[2] Supports additional displays in combination with a discrete graphics card
The integrated graphics function already supports three independent displays via its digital video outputs. This PC can even support more displays in combination with a discrete PCI-Express graphics card. This function is based on the Switchable Graphics feature introduced with the 2nd Generation of Intel® Core™ processors. To enable this, please enter the BIOS Setup Utility by pressing the "Delete" key after powering on the PC, then go to the "Advanced" tab and change the "Initiate Graphics Adapter" setting to "Switchable".
[3] 4K Ultra-HD resolution
A 4K-display with Ultra-HD resolution (3840 x 2160) should be connected via DisplayPort, as only this port supports a higher refresh rate of 60Hz. The video playback performance depends on the video format, bitrate and the processor used. Daily office applications usually won't require the system to run under full load, however for smooth 4K (2160p) video playback requirements are different. An Intel Core i3 processor or higher is required here.
[4] Right Front USB port with Fast-Charge feature
Fast charge Apple iPhone/iPad devices with up to 2A under Windows (not under Linux).
[5] How to convert DisplayPort to HDMI/DVI
The DisplayPort outputs can be converted to HDMI or DVI by an additional, passive adapter cable. For example:
DELOCK 82590: 1m, DisplayPort (male, 20p) to HDMI-A (male, 19p)
DELOCK 82435: 5m, DisplayPort (male, 20p) to DVI-D (male, 24p)
The integrated graphics automatically detects the connected display and puts out the appropriate electric signal - either DisplayPort (without an adapter) or HDMI/DVI (with an adapter).
However, a monitor with a DisplayPort connector cannot be connected to the HDMI port with a simple, passive adapter.
[6] Three independent displays simultaneously
The Shuttle XPC cube Barebone SH170R6 supports a maximum of two displays with a DVI or HDMI input. A third digital display, if required, must be connected directly to the DisplayPort output (without an adapter).
[7] Installation of Windows 7
Intel® 100 chipset series has removed their support for the Enhanced Host Controller Interface (EHCI) which is the driver software for the USB 2.0 ports. The new chipset only supports the updated Extensible Host Controller Interface (xHCI for USB 3.0) which is not supported by the original Windows 7 installation disk. This means, that peripheral devices connected by USB (like keyboard, mouse and external optical drive) do not work during the Windows 7 Installation. As a solution please add the required USB 3.0 drivers to the Windows 7 installation files - this procedure is explained in the Shuttle FAQ section at global.shuttle.com.
[8] Kaby Lake processor support
The 7th generation Intel Core processors "Kaby Lake" are supported from BIOS version SH170000.202. Download website: http://global.shuttle.com/support/download
Note: If a Kaby Lake processor is used, this XPC will only support Windows 10 and Linux operating systems. Windows 7 and 8.1 will no longer be supported.

© 2020 Shuttle Europe | Legal notice | Contact | Terms and Conditions | Privacy Policy | Sitemap