- Chassis
Black aluminum chassis
Storage bays: 1 x 5.25" (external), 2 x 3.5" (1x internal, 1x external)
Front door for I/O ports and storage drives
Kensington Security Slot at the back panel (also called a K-Slot
or Kensington lock) as a part of an anti-theft system
Dimensions: 33.2 x 21,6 x 19.8 cm (LWH), 14.2 litres
Weight: 3.5 kg net / 5.0 kg gross - Mainboard / Chipset
Shuttle FZ77, Shuttle form factor, proprietary design for XPC SZ77R5
Chipset/Southbridge: Intel® Z77 Express (codename: Panther Point)
Platform Controller Hub (PCH) as Single-Chip-Solution
Passive chipset cooling with heat sink
The Northbridge is integrated into the processor.
Solid Capacitors for sensitive areas provide excellent
heat resistance for enhanced system durability - BIOS
AMI BIOS, SPI Interface, 32MBit Flash-ROM with SPI interface
Supports PnP, ACPI 3.0, Hardware Monitoring
Supports Unified Extensible Firmware Interface (UEFI) [3]
Supports boot up from external USB flash memory - Power supply
500 Watt mini PSU, AC input voltage: 100~240V
80PLUS Bronze compliant: the PSU provides at least
82/85/82% efficiency at 20/50/100% load.
Active PFC circuit (Power Factor Correction)
ATX main power connectors: 2x10 and 2x2 pins
Graphics power connector: 6 and 6+2 pins - Operation System
This system comes without operating system.
It is compatible with Windows 7 and Windows XP - Processor support
Socket 1155 (LGA 1155) supports the second and third generation of
Intel Core i3 / i5 / i7 / Pentium / Celeron processors with up to 95W TDP
- Codename "Sandy Bridge", 32nm process technology and
- Codename "Ivy Bridge", 22nm process technology
Supports Intel® K-Series unlocked CPU
Not compatible with older Socket-1156 processors.
The Processor integrates PCI-Express, memory controller
and the graphics engine on the same die (depends on processor type)
Ivy Bridge processors are supported since BIOS version SZ77R000.107.
Please refer to the support list for detailed processor support information. - Processor cooling
Shuttle I.C.E. (Integrated Cooling Engine)
advanced I.C.E. Heatpipe technology, linear controlled 92mm fan
SilentX cooling and noise reduction technology with Active Airflow - Memory support
4 x 240 pin slots
Supports DDR3-1333/1600 SDRAM memory (PC3-10600/12800)
Supports 2+2 Dual Channel mode
Supports max. 8 GB per DIMM, maximum total size of 32 GB - Optional: Integrated Graphics [2]
The features of the integrated graphics function
depends on the used processor type.
"Sandy Bridge" processor: Intel® HD Graphics 2000/3000, DirectX 10.1
"Ivy Bridge" processor: Intel® HD Graphics 2500/4000, DirectX 11
Maximum shared memory size: 1692MB
Supports HDMI, max. resolution up to 1920x1200 @ 60Hz
Supports DVI, max. resolution up to 1920x1200 @ 60Hz
Supports D-Sub, max. resolution up to 2048x1536 @ 75Hz
(optional VGA-to-DVI-adapter required)
Supports Blu-ray Stereoscopic 3D with HDMI 1.4a [2]
Supports HDCP function with DVI and HDMI ports
Supports Full HD 1080p Blu-ray (BD) / HD-DVD playback with DVI and HDMI ports
Supports Dual-Independent-Display via HDMI and DVI-I port [2]
SZ77R5 supports 4 displays in combination with a discrete graphics card [7]
HDMI supports HD-video plus multi-channel digital audio on a single cable - PCIe Expansion Slots
1x PCI-Express x16 v3.0 slot (PEG, for graphics cards only)
1x PCI-Express x4 v2.0 slot
SZ77R5 supports Dual-slot (double-width) graphics cards -
in this case the second PCI-Express slot will be occupied.
Graphics power connector: 6 and 6+2 pins - Mini PCIe Slots
SZ77R5 features two Mini PCI Express expansion slots:
1) half size, supports PCIe 2.0 and USB 2.0, e.g. for WLAN cards [4]
2) full size, supports PCIe 2.0, SATA 3G and USB 2.0
e.g. for Mini SATA (mSATA) flash memory cards [5] - 8-channel HD audio
7.1 channel High Definition Audio with Realtek ALC888S codec
Azalia standard support
Analog: line-out (7.1-ch), line-in, microphone, AUX input (onboard)
Digital: optical S/PDIF-out (Digital Audio also via HDMI output) - Gigabit LAN
Realtek RTL 8111E Ethernet network controller
PCI Express interface
IEEE 802.3u 1000Base-T compliant
Supports 10 / 100 / 1.000 MBit/s operation
Supports Wake-on-LAN (WOL) - Drive connectors
2x Serial ATA rev. 3.0, max. 6 Gbit/s (onboard)
2x Serial ATA rev. 2.0, max. 3 Gbit/s (onboard)
1x External Serial ATA rev. 2.0, max. 3 Gbit/s (back panel)
Supports Intel Rapid Storage Technology (Raid 0/1/5/10, JBOD) - Front Panel connectors and buttons
Microphone input
Headphone output (line-out)
2x USB 3.0
2x USB 2.0 (1x Quick charge with up to 2A, see 8)
Power button
Power indicator ( LED)
Hard disk drive indicator ( LED) - Back Panel connectors
HDMI (supports digital audio) [2]
DVI-I (supports analog VGA with optional adapter) [2]
4x USB 2.0
2x USB 3.0
GigaBit LAN (RJ45)
8-ch Audio line-out (2x rear/front, bass/center, surround/back)
Audio Line-in
External Serial ATA (eSATA 3Gb/s)
Digital Audio: optical S/PDIF output
Clear CMOS button
optional: serial port RS-232 (Accessory: H-RS232)
3x perforations for optional WLAN antennas [4] - Other connectors
2x USB 2.0 (one set with 2x5 pins)
1x RS232 (2x5 pins) for optional accessory H-RS232
2x fan connectors (4 pins)
Audio AUX input - Included Accessories
Multilanguage XPC Installation Guide
32/64 bit driver disk
2x Serial ATA cables
Power Cord
Screws
Heatsink Compound - Optional Accessories
Backpanel COM port adapter for the RS232 serial interface (H-RS232)
Wireless LAN 802.11n module (PW01, see [4]) - Environmental Spec
Operating temperature range: 0~35°C
Relative humidity range: 10~90% (non-condensing) - Certifications / Compliance
EMI: FCC, CE, BSMI, C-Tick
Safety: ETL, CB, BSMI, TÜV
Other: Windows 7 Premium Logo, RoHS, ErP Lot 6, Energy Star 5.0 - Conformity
This device is classed as a technical information
equipment (ITE) in class B and is intended for use in
living room and office. The CE-mark approves the
conformity by the EU-guidelines:
- EMV-guideline 89/336/EWG electromagnetic tolerance
- LVD-guideline 73/23/EWG use of electric devices
within certain voltage-limits
Notes:
[1] Overclocking Warning
Please note there is a certain risk involved with overclocking, including adjusting the setting in the BIOS or using third-party overclocking tools. Overclocking may affect your system stability or even cause damage of the components and devices of your system. It is done at your own risk and expense. Shuttle cannot be held responsible for possible damage caused by overclocking.
[2] The integrated video outputs (HDMI and DVI-I) cannot be used, if the processor does not integrate a graphics function, e.g. Intel Core i5-2380P, Core i5-2450P and Core i5-2550K. Not all compatible Intel Prozessors with integrated graphics support the HDMI 1.4a standard. Please check the specification of the used processor.
[3] The Unified Extensible Firmware Interface (UEFI) is required when booting from hard disks larger than 2.2 TB under Windows 64 bit operating systems such as Windows 7, Windows Vista SP1 and Windows Server 2008/2003 SP1.
[4] Optional Wireless LAN module: this XPC supports the optional WLAN module PW01. The Shuttle XPC accessory PW01 consists of a half-size Mini-PCIe card with IEEE 802.11n functionality and an external antenna with appropriate antenna cable.
[5] mini-SATA (mSATA)
not to be confused with the "micro SATA" connector, is a newer industry standard which converts the electrical SATA interface (1.5 or 3.0 Gbit/s) to the pysical "Mini PCI Express" mini card form factor. Applications include mobile devices that require a smaller solid-state drive, and Intel e.g. Z68/Z77 mainboards that utilize Intel's Smart Response Technology (SRT).
[6] Intel Smart Response Technology (SRT, formerly "SSD caching")
The Shuttle XPC Barebone SZ77R5 supports the Intel Smart Response Technology which allows a SATA solid-state drive (SSD up to 60GB) to function as cache for a conventional hard disk drive (HDD). This is allowing users to experience system performance similar to SSD-only systems.
[7] SZ77R5 supports 4 displays in combination with a discrete graphics card
With Shuttle SZ77R5 the user can support 4 displays in combination with a discrete PCI-Express graphics card, when the initial display is connected to the integrated graphics. For this, you have to enter the BIOS Setup Utility by pressing the "Delete" key after power on the PC. In the "Advanced" BIOS menu please set "Initiate Graphic Adapter" to "Onboard VGA". The Windows Device Manager will show the integrated graphics and the external discrete graphics card as well. Note, that the graphics performance is limited to the integrated graphics engine. This function is based on the Switchable Graphics feature of the 2nd Generation Intel® Core™ Processors with Intel® HD Graphics 3000/2000.
[8] Right Front USB port with Quick Charge feature
Quick charge with up to 2A only for Apple iPhone/iPad unter Windows XP and Windows 7 (not under Linux)
