• Chassis
    J3-type, color: black
    Case cover made of aluminum, body made of steel
    Storage bays: 1 x 5.25" external, 2 x 3.5" internal
    Front door for I/O and card reader
    Kensington Security Slot at the back panel (also called a K-Slot 
    or Kensington lock) as a part of an anti-theft system
    Dimensions: 33 x 21,.5 x 19 cm (LWH without foot rubber) = 13.5 litres
    Weight: 6.8 kg net / 7.5 kg gross
  • Mainboard
    Shuttle FX58V2, Shuttle form factor, proprietary design for XPC SX58J3
    Chipset: Intel X58 Express (codenamed Tylersburg) + ICH10R (I/O Controller Hub)
    Solid Capacitors for excellent heat resistance and enhanced system durability
  • Power supply
    500 Watt mini PSU, AC input voltage: 100~240V
    80PLUS Bronze certified (>82/85/82% energy efficiency at 20/50/100% load)
    Active PFC circuit (Power Factor Correction)
    ATX power connectors: 20 pin + 8 pin (12V)
  • Processor support
    Supports Intel® Core™ i7 processors with Socket 1366
    Supports 900 series Quadcore processors and Core i7-980X Six-Core
    Please refer to the support list for detailed processor support information:
    http://global.shuttle.com/support_list.jsp
    The previous Front Side Bus (FSB) by the new QPI (QuickPath Interconnect)
    which features up to 6.4GT/s (3.2GHz) and a maximum transfer rate of 25.6GB/s.
    Supports Dynamic Overclock feature (DOC):
    Easily overclock function to be enabled through a simple BIOS setting. *)
  • Heatpipe processor cooling
    Shuttle Integrated Cooling Engine (I.C.E.)
    Heatpipe Technology
  • Memory support
    4 x 240 pin slots, supports 3+1 channel configuration (Triple Channel)
    Supports DDR3-1066/1333 SDRAM memory (PC3-8500/10600)
    Supports DDR3-1600 in overclocking mode *)
    Max. 4 GB per DIMM,  up to a total size of 16 GB
    Warning: DIMMs with voltage over 1.65V may damage your CPU. 
    Shuttle recommends you install the DIMMs with voltage setting below 1.6V.
  • Slots
    2x PCI-Express x16 Version 2.0 expansion slots 
    for x16 graphics cards (full 16 lanes each slot)
    Supports Dual Graphics card by ATI CrossFireX™ or NVIDIA SLI™ Technology. 
    Two graphics cards can be used to enable 4-monitor-operating or ATI CrossFireX™ / NVIDIA SLI™ mode for leading-edge gaming performance.
    Supports two single-slot or one double-width graphics card.
  • 8-channel audio
    7.1 channel High Definition Audio with Realtek ALC888 codec
    Analog: line-out (8-ch), line-in, microphone, Audio AUX-in (onboard)
  • Dual Gigabit LAN Controller
    2x RJ45 connectors supports Teaming-Mode**)
    Marvell 8057 Ethernet network controller
    IEEE 802.3u 1000Base-T compliant
    Supports 10 / 100 / 1.000 MBit/s operation
    Supports Wake-on-LAN
  • Card reader
    Integrated USB 2.0 multi format card reader in the front panel supports:
    Secure Digital (SD, SDHC), MultiMediaCard (MMC), 
    Memory Stick (MS Pro/Pro Duo/Pro-HG)
  • Drive connectors
    Serial-ATA II, 3 Gb/s (300 MB/s) bandwidth
    4x internal (SATA, back panel) 
    2x external (eSATA, 1x front, 1x back)
    Power connector for eSATA hard disks (incl. cable)
    Intel Matrix Storage Technology enabled striping and mirroring
    Supports RAID mode 0, 1, 5, 10
    Supports Native Command Queuing (NCQ)
  • Front Panel connectors
    Microphone
    Headphone (Line-out)
    USB 2.0
    eSATA / USB 2.0 combo port
    4-in-1 Card Reader (SD, SDHC, MMC, MS/Pro/Duo)
    Power button
    Power indicator (blue LED)
    HDD indicator (orange LED)
  • Back Panel connectors
    8x USB 2.0
    2x GigaBit LAN (RJ45)
    1x External Serial ATA Hotplug (eSATA)
    Power connector for eSATA hard disks (incl. cable)
    8-ch Audio line-out (2x front, 2x rear, bass/center, surround/back)
    Audio Line-in
    Clear CMOS button
  • Other connectors
    1x USB 2.0 (1x5 pins)
    2x fan connectors (4 pins and 3 pins)
    1x Digital Audio S/PDIF output (3 Pins)
    1x Audio AUX input
    LPC interface port ***)
  • Accessories
    Driver DVD ROM
    Quick Installation Guide (multi-language)
    2x SATA cables (pre-installed)
    IDE cable for optical drive
    External SATA (eSATA) cable
    One 2x2 pin power cable for eSATA hard disks
    1x Power cord
    Screws
    Heatsink compound
  • Conformity
    This device is classed as a technical information
    equipment (ITE) in class B and is intended for use in 
    living room and office. The CE-mark approves the 
    conformity by the EU-guidelines:
    - EMV-guideline 89/336/EWG electromagnetic tolerance
    - LVD-guideline 73/23/EWG use of electric devices 
    within certain voltage-limits

*) Overclocking Warning
Please note there is a certain risk involved with overclocking, including adjusting the setting in the BIOS or using third-party overclocking tools. Overclocking may affect your system stability or even cause damage of the components and devices of your system. It is done at your own risk and expense. Shuttle cannot be held responsible for possible damage caused by overclocking.
**) Teaming Mode
The teaming function allows you to group both available network adapters together to function as a single adapter - a method of creating a virtual LAN. The benefit of this approach is that it enables load balancing and failover.
***) Optional slot bracket adapter for serial and parallel ports
You can install an optional slot bracket adapter which can be used to provide one serial and one parallel port at the back panel. The cable of this adapter will be connected to the onboard LPC port and one expansion slot will be occupied by the adapter.

© 2020 Shuttle Europe | Legal notice | Contact | Terms and Conditions | Privacy Policy | Sitemap