• Chassis
  J3-type, color: black
  Case cover made of aluminum, body made of steel
  Storage bays: 1 x 5.25" external, 2 x 3.5" internal
  Front door for I/O and card reader
  Kensington Security Slot at the back panel (also called a K-Slot 
  or Kensington lock) as a part of an anti-theft system
  Dimensions: 33 x 21,.5 x 19 cm (LWH without foot rubber) = 13.5 litres
  Weight: 6.8 kg net / 7.5 kg gross
• Mainboard
  Shuttle FX58V2, Shuttle form factor, proprietary design for XPC SX58J3
  Chipset: Intel X58 Express (codenamed Tylersburg) + ICH10R (I/O Controller Hub)
  Solid Capacitors for excellent heat resistance and enhanced system durability
• Power supply
  500 Watt mini PSU, AC input voltage: 100~240V
  80PLUS Bronze certified (>82/85/82% energy efficiency at 20/50/100% load)
  Active PFC circuit (Power Factor Correction)
  ATX power connectors: 20 pin + 8 pin (12V)
• Processor support
  Supports Intel® Core™ i7 processors with Socket 1366
  Supports 900 series Quadcore processors and Core i7-980X Six-Core
  Please refer to the support list for detailed processor support information:
  http://global.shuttle.com/support_list.jsp
  The previous Front Side Bus (FSB) by the new QPI (QuickPath Interconnect)
  which features up to 6.4GT/s (3.2GHz) and a maximum transfer rate of 25.6GB/s.
  Supports Dynamic Overclock feature (DOC):
  Easily overclock function to be enabled through a simple BIOS setting. *)
• Heatpipe processor cooling
  Shuttle Integrated Cooling Engine (I.C.E.)
  Heatpipe Technology
• Memory support
  4 x 240 pin slots, supports 3+1 channel configuration (Triple Channel)
  Supports DDR3-1066/1333 SDRAM memory (PC3-8500/10600)
  Supports DDR3-1600 in overclocking mode *)
  Max. 4 GB per DIMM,  up to a total size of 16 GB
  Warning: DIMMs with voltage over 1.65V may damage your CPU. 
  Shuttle recommends you install the DIMMs with voltage setting below 1.6V.
• Slots
  2x PCI-Express x16 Version 2.0 expansion slots 
  for x16 graphics cards (full 16 lanes each slot)
  Supports Dual Graphics card by ATI CrossFireX™ or NVIDIA SLI™ Technology. 
  Two graphics cards can be used to enable 4-monitor-operating or ATI CrossFireX™ / NVIDIA SLI™ mode for leading-edge gaming performance.
  Supports two single-slot or one double-width graphics card.
• 8-channel audio
  7.1 channel High Definition Audio with Realtek ALC888 codec
  Analog: line-out (8-ch), line-in, microphone, Audio AUX-in (onboard)
• Dual Gigabit LAN Controller
  2x RJ45 connectors supports Teaming-Mode**)
  Marvell 8057 Ethernet network controller
  IEEE 802.3u 1000Base-T compliant
  Supports 10 / 100 / 1.000 MBit/s operation
  Supports Wake-on-LAN
• Card reader
  Integrated USB 2.0 multi format card reader in the front panel supports:
  Secure Digital (SD, SDHC), MultiMediaCard (MMC), 
  Memory Stick (MS Pro/Pro Duo/Pro-HG)
• Drive connectors
  Serial-ATA II, 3 Gb/s (300 MB/s) bandwidth
  4x internal (SATA, back panel) 
  2x external (eSATA, 1x front, 1x back)
  Power connector for eSATA hard disks (incl. cable)
  Intel Matrix Storage Technology enabled striping and mirroring
  Supports RAID mode 0, 1, 5, 10
  Supports Native Command Queuing (NCQ)
• Front Panel connectors
  Microphone
  Headphone (Line-out)
  USB 2.0
  eSATA / USB 2.0 combo port
  4-in-1 Card Reader (SD, SDHC, MMC, MS/Pro/Duo)
  Power button
  Power indicator (blue LED)
  HDD indicator (orange LED)
• Back Panel connectors
  8x USB 2.0
  2x GigaBit LAN (RJ45)
  1x External Serial ATA Hotplug (eSATA)
  Power connector for eSATA hard disks (incl. cable)
  8-ch Audio line-out (2x front, 2x rear, bass/center, surround/back)
  Audio Line-in
  Clear CMOS button
• Other connectors
  1x USB 2.0 (1x5 pins)
  2x fan connectors (4 pins and 3 pins)
  1x Digital Audio S/PDIF output (3 Pins)
  1x Audio AUX input
  LPC interface port ***)
• Accessories
  Driver DVD ROM
  Quick Installation Guide (multi-language)
  2x SATA cables (pre-installed)
  IDE cable for optical drive
  External SATA (eSATA) cable
  One 2x2 pin power cable for eSATA hard disks
  1x Power cord
  Screws
  Heatsink compound
• Conformity
  This device is classed as a technical information
  equipment (ITE) in class B and is intended for use in 
  living room and office. The CE-mark approves the 
  conformity by the EU-guidelines:
  - EMV-guideline 89/336/EWG electromagnetic tolerance
  - LVD-guideline 73/23/EWG use of electric devices 
  within certain voltage-limits

*) Overclocking Warning
Please note there is a certain risk involved with overclocking, including adjusting the setting in the BIOS or using third-party overclocking tools. Overclocking may affect your system stability or even cause damage of the components and devices of your system. It is done at your own risk and expense. Shuttle cannot be held responsible for possible damage caused by overclocking.
**) Teaming Mode
The teaming function allows you to group both available network adapters together to function as a single adapter - a method of creating a virtual LAN. The benefit of this approach is that it enables load balancing and failover.
***) Optional slot bracket adapter for serial and parallel ports
You can install an optional slot bracket adapter which can be used to provide one serial and one parallel port at the back panel. The cable of this adapter will be connected to the onboard LPC port and one expansion slot will be occupied by the adapter.