- Special Deluxe Features
 Fingerprint recognition technology ***)
 Speed-Link - easily connect 2 PCs via USB and share data
 Wireless LAN 802.11b/g, up to 54 Mbit/s data transfer rate
 Bluetooth 2.0 dongle
- Chassis
 P2-type aluminum chassis, color: black
 storage bays: 1 x 5.25", 3 x 3.5" (2 internal)
 stealthed drive doors
 dimensions: 32.5 x 22 x 21 cm (LWH)
 weight: 4.2 kg net / 6.0 kg gross
- Mainboard
 Shuttle FX48, Shuttle form factor, proprietary design for XPC SX48P2 Deluxe
 Chipset: Intel X48 Express (MCH) + ICH9R (I/O Conroller Hub)
 Solid Capacitors for excellent heat resistance for enhanced system durability
 Color slots/connectors design (Power switch, USB, PCIe, DDR3)
 Dimensions: 20.5 x 28 cm
- Power supply
 450 Watt ATX mini PSU, AC input voltage: 100~240V
 80 PLUS® certified (80% or greater energy-efficient)
 Dimensions: 85(W) x 83(H) x150(D) mm
 Connectors: 20-pin ATX, 4-pin ATX12V
 Active PFC circuit (Power Factor Correction)
 With AC power switch
- Processor support
 Socket 775 supports Intel processors with Core technology
 Supports 800, 1066, 1333 or 1600MHz front side bus (FSB)
 Supports Core 2 Quad/Extreme/Duo, Pentium Dual-Core, Pentium D
 Supports Core 2 multi-core processors in 45nm technology
 Please refer the support list for detailed processor support information:
 http://global.shuttle.com/support_list.jsp
- Overclocking*)
 CPU frequency, CPU voltage, RAM frequency, RAM voltage
 Dynamic Overclock feature (DOC):
 Easily overclock from 3/5/7/10% through the BIOS.
- Cooling system
 Shuttle I.C.E. heat-pipe module (Integrated Cooling Engine)
 SilentX Cooling and Noise Reduction Technology
 advanced Heatpipe technology, linear fan control.
 3 independent airflow zones: CPU, HDD and Case
 (including power supply, mainboard and graphics card)
 OASIS Cooling Technology: additional fanless heat-pipe design
 covering the MOSFET modules (VRM), north- and southbridge
- Memory support
 4 memory slots à 240 pins
 Supports DDR3-1066/1333/1600 memory (unbuffered, non-ECC)
 Supports Dual Channel
 max. 2 GB per DIMM, up to a total size of 8 GB
- PCI-Express-Slots
 2x PCI-Express x16 Version 2.0 expansion slots
 for x16 graphics cards (full 16 lanes each slot)
 Supports Dual Graphics: Two graphics cards can be used
 to enable 4-monitor-operating.
 Supports two single-slot or one double-width graphics card.
 1x Mini-PCIe x1 slot at the bottom of the chassis
 supports Intel Turbo Memory (codename: Robson)
- 8-channel audio with DD/DTS
 7.1 channel High Definition Audio, Realtek ALC888DD codec
 Supports Dolby® Digital Live! and DTS™ Connect (Digital Theater Systems)
 analog: line-out (8-ch), line-in, microphone, CD-in, AUX
 digital: optical and coaxial S/PDIF-out
- Dual Gigabit LAN Controller
 2x RJ45 connectors supports Teaming-Mode**)
 2x Marvell 88E8056 Ethernet network controller
 With PCI Express x1 interface
 IEEE 802.3u 1000Base-T compliant
 Supports 10 / 100 / 1.000 MBit/s opteration
 Supports Wake-on-LAN
- Drive connectors
 Serial-ATA II, 3 Gb/s (300 MB/s) bandwidth
 4x internal (SATA) plus 2x external (eSATA)
 External Serial ATA power port with cable
 Intel Matrix Storage Technology enabled striping and mirroring
 Supports RAID 0, 1, 5, 10 and JBOD on just two or three hard disk drives
 Supports Native Command Queuing (NCQ)
 1x IDE ATA 100 drives (JMicron JMB368 Controller)
 1x floppy disk drive
- Front Panel connectors and functions
 Microphone
 Headphone (Line-out)
 2x USB 2.0
 Fingerprint recognition
 Power button with LED
 Hard disk LED
 Bluetooth LED
 WiFi (WLAN) LED
 Reset button
 Fingerprint Sensor
 Speedlink On/Off button
- Back Panel connectors
 6x USB 2.0
 2x GigaBit LAN (RJ45)
 2x External Serial ATA (eSATA) with power port
 8-ch Audio line-out (2x rear/front, bass/center, surround/back)
 Digital Audio S/PDIF output: optical and coaxial
 Audio Line-in
 Audio Microphone input
 Clear CMOS button
 Wireless LAN Antenna
- Other connectors
 4x USB 2.0 (two sets with 2x5 pins)
 4x fan connectors (3x 4 pins, 1x 3 pins)
 Headers for PS/2 mouse and PS/2 keyboard
 CIR header
- Accessories
 Multi-language XPC manual
 Quick guides for Bluetooth (BT12) and WLAN (PN20)
 Driver DVD with software (Norton Internet Security 2007, Adobe Reader)
 Data cables: 1x floppy, 1x PATA, 3x SATA (PATA/2xSATA preinstalled)
 1 set to 2 set 6-pin VGA power cable
 2x CrossFire bridges for ATI graphics cards
 USB cable (type A-to-A) for USB Speedlink function
 1 set 4 pin to SATA power cable
 Dipole antenna for the pre-installed WLAN module
 AC Power Cord
 2x additional Front feet, Screws, Heatsink Compound
- Conformity
 This device is classed as a technical information
 equipment (ITE) in class B and is intended for use in
 living room and office. The CE-mark approves the
 conformity by the EU-guidelines:
 - EMV-guideline 89/336/EWG electromagnetic tolerance
 - LVD-guideline 73/23/EWG use of electric devices
 within certain voltage-limits
*) Overclocking Warning
Please note there is a  certain risk involved with overclocking, including adjusting the setting in the  BIOS or using third-party overclocking tools. Overclocking may affect your  system stability or even cause damage of the components and devices of your  system. It is done at your own risk and expense. Shuttle cannot be held  responsible for possible damage caused by overclocking.
**) Teaming  Mode
The teaming function allows you to group both available network  adapters together to function as a single adapter - a method of creating a  virtual LAN. The benefit of this approach is that it enables load balancing and  failover.
***) Fingerprint software: internet access required for  activating procedure

 
	
		









