• Fanless and silent
    Passive heatpipe cooling, no fan noise at all
    Perfect to be used in noise-sensitive environments
    Fanless, dust-free and thus virtually maintenance-free
  • IP54 protected
    The front panel is dust-protected and protected from 
    splashing of water according to protection class IP54.
  • Chassis
    Colour: black
    Dimensions: 391 x 327 x 42 mm (W x H x D) 
    100mm VESA mount capable
    Mounting hole for Kensington lock
    Weight: 3.6 kg net, 4.8 kg gross
  • Operating system
    This system comes without operating system.
    It is compatible with:
    - Windows 10 - 64-bit
    - Linux - 64-bit
  • Touchscreen
    Touchscreen function supports fingertip input
    Resistive 5-wire single-touch  technology
    Stylus for the touchscreen included
  • 39.6cm display (15.6")
    39.6 cm / 15.6" LCD display, ratio: 16:9 wide-screen panel
    Resolution: 1366 x 768 = 1.05 Megapixel
    Backlight unit: High power LED, Luminance: 220 cd/sqm
    Glass thickness: 0.5 mm
  • Processor
    Model: Intel Core i3-7100U (ULV)
    System-on-a-chip architecture (SoC): no chipset required
    BGA1356 package - directly soldered onto the mainboard
    Code name: Kaby Lake-U (7th Generation Intel Core)
    Cores / Threads: 2 / 4
    Clock rate: 2.4 GHz
    L1/L2/L3 Cache: 128 kB / 512 kB / 3072 kB
    Memory controller: DDR4-2133 Dual Channel (1.2 V)
    TDP wattage: 15 W maximum
    Manufacturing process: 14 nm
    Maximum Tjunction Temperature: 100 °C
    Supports Hyper-Threading (HT), 64-bit, VT-x (EPT), VT-d, Enhanced SpeedStep, NX bit, AES-NI, SSE 4.1/4.2
    Integrated graphics engine
  • Integrated Graphics
    Intel HD Graphics 620
    GPU clock frequency: 300~1000 MHz
    Execution Units (EUs): 24
    Supports DirectX 12
    Supports full H264, H265 8/10 bit, VP8/9, VC-1, AVC hardware decoding
    Supports Quick Sync Video and Clear Video HD technology
  • Up to three displays simultaneously
    Two video ports support two additional independent screens:
    1) HDMI 1.4 supports 1920 x 1080 @ 60 Hz or 3840 x 2160 @ 30 Hz
    2) VGA / D-Sub analog video supports 1920 x 1080 @ 60 Hz
    Special conditions for operation in Multi-Monitoring mode:
    1) Clone mode: all displays show the same content at 1366x768 resolution
    2) Extended mode: all displays show different content
  • BIOS
    AMI BIOS in 8 MByte EEPROM with SPI interface
    Supports Power fail resume / always on
    Supports Wake-on-LAN (WOL) from S3, S4, S5 ACPI states
    Supports hardware monitoring and watch dog functionality
    Supports Firmware TPM v2.0 functionality
  • Memory
    8 GB DDR4-2133 (PC4-17000) SDRAM at 1.2 V
    SO-DIMM memory with 260 pins
    Supports a maximum of 16 GB per DIMM,  maximum total size: 32 GB
  • 2.5" Storage Drive
    Supports one SATA hard disk or one SATA SSD drive in 6.35 cm / 2.5" format
    The SATA 3.0 interface supports up to 600MB/s data transfer speed (6 Gbit/s)
    Supports one drive with up to 12.5 mm in height
  • M.2 SSD Storage
    120 GB NVMe SSD storage drive in M.2 form factor
  • Card Reader
    Integrated card reader supports SD, SDHC and SDXC memory flash cards
  • Webcam
    Integrated 2.0 Megapixel (1600 x 1200) HD webcam
  • Microphone and speakers
    Front panel with integrated Electret Condenser Microphone and
    2x 2 W speakers
  • Integrated Audio
    Realtek ALC269 Audio Codec
    Two analog audio connectors (3.5 mm) on the bottom side: 
    1) Line-out (head-phones)
    2) Microphone input
    Digital Audio is supported via HDMI.
  • Wired Network
    Intel i211 Ethernet Controller with MAC, PHY and PCIe interface
    Supports 10 / 100 / 1.000 MBit/s operation
    Supports WAKE ON LAN (WOL) from S3, S4 modes
    Supports network boot by Preboot eXecution Environment (PXE)
  • Wireless Network (WLAN)
    WLAN chip: Realtek 8188EE
    Supports IEEE 802.11b/g/n for 2.4 GHz band
    Speed: max. 150 Mbps up-/downstream
    Security: WPA/WPA2, WEP
    M.2-2230AE card with internal antenna
  • Front LEDs
    Power LED (blue)
    Hard disk LED (orange)
  • Connectors left side
    Power button
    2x USB 2.0
    SD card reader
    Hole with power button
    Hole with Clear CMOS button
  • Connectors bottom side
    HDMI 1.4 (supports digital video and digital audio)
    2x USB 3.0
    2x USB 2.0
    Gigabit Network (LAN, RJ45)
    Audio Line-out / head-phones (3.5 mm jack)
    Microphone input (3.5 mm jack)
    DC input for external power adapter (5.5 / 2.5 mm)
    Perforation for optional TV/3G antenna (diameter: 9 mm)
    Optional: 2x COM/serial (RJ45), DIO (RJ11) for cash drawer (accessory POS01)
  • Connectors rear side
    VGA connector (D-Sub 15 pol., analog video)
    Optional: 2x COM/serial (D-Sub), 1x LPT/parallel (accessory: PCL71 or POS01)
  • Connectors onboard
    Internal USB 2.0 type A connector for a USB stick
    Serial ATA (6 Gbps)
    Serial ATA power connector
    3x USB 2.0 header (all occupied)
    eDP connector (Embedded DisplayPort) - occupied by the display
    Connector for optional COM/LPT adapter POS01 or PCL71
  • Power adapter
    External 65 W power adapter (fanless)
    Input: 100~240 V AC, 50/60 Hz, max. 1.6 A
    Output: 19 V DC, max. 3.42 A, max. 65 W
  • DC Input connector
    DC Input Connector: 5.5 / 2.5 mm (outer/inner diameter)
    The DC-input of the computer supports an external
    power source with either 12V±5% or 19V±5%.
  • Included Accessories:
    Quick Guide
    Driver DVD
    External  Power Adapter (65W / 19V)
    Power cord
  • Optional Accessories:
    PCL71: COM / LPT / RJ11 adapter:
    - 1x Parallel (25p D-Sub)
    - 2x Serial RS232 (9p D-Sub) supports 0 / 5 / 12V
    POS01: COM / LPT / RJ11 adapter:
    - 1x Parallel (25p D-Sub)
    - 2x Serial RS232 (9p D-Sub) supports 0 / 5 / 12V
    - 2x Serial RS232 (8p RJ45)
    - 1x DIO/RJ11 connector for cash drawer supports 12 / 24V
    PF55: Carrying bag
  • Environmental criteria
    Operating temperature: 0~40 °C
    Humidity: 10~90 %
  • Certification and Compliance
    EMI: CE, FCC, BSMI, RCM, VCCI, RED
    Safety: CB, BSMI, ETL
    Other compliances: RoHS, ErP Lot3, Energy Star v6.0
  • Conformity
    This device is classed as a technical information equipment (ITE) in class B and is intended for use in living room and office. The CE-mark approves the conformity by the EU directives:
    (1) 2014/30/EU relating to electromagnetic compatibility (EMC),
    (2) 2014/35/EU relating to Electrical Equipment designed for use within certain voltage limits (LVD),
    (3) 2009/125/EC relating to ecodesign requirements for energy-related products (ErP),
    (4) 2014/53/EU Radio Equipment Directive (RED)
© 2020 Shuttle Europe | Legal notice | Contact | Terms and Conditions | Privacy Policy | Sitemap