- Fanless and silent
Passive cooling, no fan noise at all
Perfect to be used in noise-sensitive environments
Fanless, dust-free and thus virtually maintenance-free - Chassis
Dimensions without Stand: 25.2 x 16.2 x 3.85 cm (DxHxW) = 1.57 L
Hole for the Kensington Lock at the back panel
Optional accessory: 75mm and 100mm VESA mounting kit (PV01) - Operation System
Windows 7 Professional (32 bit) - Processor
Intel Dual Core Atom processor D2700 (Codename: Cedarview)
Intel Hyper-Threading technology: 2-threads per core
32 nm manufacturing process, Micro-FCBGA11 package
Intel 64 architecture, Core clock: 2.13 GHz
L2 Cache: 1024kB , TDP: max. 10W
Supports SSE2, SSE3, SSSE3, Execute Disable Bit
Integrated North Bridge with controller for memory and graphics - Passive cooling without fan
Passive, completely fanless cooling through convective heat transfer
Warning: Please make sure the system is always placed
upright using either its stand or the optional VESA mount.
Ventilation holes must not be blocked to ensure sufficient cooling. - Chipset
Intel® NM10 Express Chipset (south bridge)
Platform Controller Hub (PCH)
Code name: Tiger Point - BIOS
AMI BIOS in a 8Mbit Flash ROM supports PnP, ACPI 2.0
Supports external USB flash memory card boot up
Supports Power fail resume / AC power on state / always on / always off
Supports Wake-on-LAN (WOL) from S3, S3, S5 ACPI states
Supports Unified Extensible Firmware Interface (UEFI) - Memory
2 GB DDR3-1333 SO-DIMM memory (at DDR3-1066 speed)
Supported maximum capacity: 4 GB - Hard disk drive
320 GB 2.5" Serial ATA hard disk - Integrated Graphics
The Graphics Processing Unit (GPU) is integrated into the processor
Intel GMA 3650, Graphics Base Frequency: 640 MHz
Supports DirectX 9
Maximum shared memory: 8MB pre-allocated
plus 384MB Video Memory Technology (DVMT)
Two video outputs: HDMI v1.3 and D-Sub (VGA)
Supports dual display in clone or extended mode - Integrated Audio
IDT92HD81 Audio Codec with Azalia support
Two analog audio connectors (3.5mm):
1) Line out (head phone)
2) microphone input - Card Reader
Integrated card reader supports SD, SDHC and SDXC memory flash cards - Wired Network
RJ45 connector supports Gigabit LAN at 10/100/1000 Mbit/sec.
Network controller JMC 251
Supports Wake-on-LAN (WOL) from S3, S3, S5 ACPI states - Wireless Network (WLAN)
Supports IEEE 802.11b/g/n, max. 150Mbps up-/downstream
Security: WPA/WPA2(-PSK), WEP 64/128bit, IEEE 802.11x/i
Half size Mini-PCIe-Card - Connectors
HDMI v1.3 digital video and audio output
D-Sub/ VGA analog video ( 15 pin)
5x USB 2.0 (1x front, 4x rear)
Gigabit network (LAN, RJ45)
Audio Line-out (head phone)
Microphone input
DC input for the external power adapter - LEDs and Buttons
Power button
Power LED (white)
Hard disk LED (blue) - Power supply
External 40W AC/DC power adapter (fanless), 19V / 2.1A
AC Input: 100~240V AC, 50~60Hz
Automatic voltage adjust
Dimensions: 89.5 x 37 x 26.5 mm (LWH)
DC Connector: 5.5/2.5mm (outer/inner diameter) - Optional Accessories
- VESA mount made of metal (PV01)
- Adapter for second 2.5" drive instead of optical drive (PHD2) - Environmental Spec
Operating temperature range: 0~35°C
Relative humidity range: 10~90% (non-condensing) - Certification and Compliance
EMI: CE, FCC, BSMI, C-Tick, CCC
Safety: CB, BSMI, ETL
Other compliances: RoHS, Eup Lot6
This device is classed as a technical information
equipment (ITE) in class B and is intended for use in
living room and office. The CE-mark approves the
conformity by the EU-guidelines:
- EMV-guideline 89/336/EWG electromagnetic tolerance
- LVD-guideline 73/23/EWG use of electric devices
within certain voltage-limits
