• Fanless and silent
    Passive cooling system, no fan noise at all
    Perfect to be used in noise-sensitive environments
    Fanless, dust-free and thus virtually maintenance-free
  • 24/7 nonstop operation
    This device is approved for 24/7 permanent operation.
    Requirements:
    - Free circulation of air amongst the PC must be guaranteed.
    - Ventilation holes must be kept clear.
  • IP54 protected
    The front panel is dust-protected and protected from 
    splashing of water according to protection class IP54.
  • Chassis
    Colour: black
    Dimensions:
    - without cable collector box: 29.9 x 20.3 x 5.0 cm (W x H x D)
    - with cable collector box: 29.9 x 27.1 x 5.0 cm (W x H x D)
    100 mm VESA mount capable
    Mounting hole for Kensington lock
    Weight: 2.47 kg net, 3.39 kg gross
  • 29.5 cm display (11.6")
    29.5 cm / 11.6" LCD TN display
    Aspect ratio: 16:9 widescreen
    Resolution: 1366 x 768 = 1.05 Megapixel
    Backlight unit: LED, Luminance: 250 cd/sqm (typ.)
    Glass thickness: 3.2 mm, Anti-Glare
  • Touchscreen
    Touchscreen function supports fingertip input
    Capacitive Touch Panel with 10-point multi-touch
    Supports input with gloves (PVC, cotton, cotton/linen)
    Stylus pen not supported
  • Operating system
    Windows 10 IoT Enterprise 2019 LTSC (64-bit)
  • Processor
    Model: Intel Celeron 3865U (ULV)
    System-on-a-chip architecture (SoC): no chipset required
    BGA1356 package - directly soldered onto the mainboard
    Code name: Kaby Lake-U (7th Generation Intel Core)
    Cores / Threads: 2 / 2
    Clock rate: 1.8 GHz
    L1/L2/L3 Cache: 128 kB / 512 kB / 2048 kB
    Memory controller: DDR4-2133 Dual Channel (1.2 V)
    TDP wattage: 15 W maximum
    Manufacturing process: 14 nm
    Maximum Tjunction Temperature: 100 °C
    Supports 64-bit, VT-x (EPT), VT-d, Enhanced SpeedStep, NX bit, AES-NI, SSE 4.1/4.2
    Integrated graphics engine
  • Integrated Graphics
    Intel HD Graphics 610
    GPU clock frequency: 300~900 MHz
    Execution Units (EUs): 12
    Supports DirectX 12
    Supports full H264, H265 8/10 bit, VP8/9, VC-1, AVC hardware decoding
    Supports Quick Sync Video and Clear Video HD technology
  • Up to three displays simultaneously
    Two video ports support two additional independent screens:
    1) HDMI 1.4 supports 1920 x 1080 @ 60 Hz or 3840 x 2160 @ 30 Hz
    2) VGA / D-Sub analog video supports 1920 x 1080 @ 60 Hz
    Special conditions for operation in Multi-Monitoring mode:
    1) Clone mode: all displays show the same content at 1366 x 768 resolution
    2) Extended mode: all displays show different content
  • BIOS
    AMI BIOS in 8 MByte EEPROM with SPI interface
    Supports Power fail resume / always on
    Supports Wake-on-LAN (WOL) from S3, S4, S5 ACPI states
    Supports hardware monitoring and watch dog functionality
    Supports Firmware TPM v2.0 functionality
  • Memory
    4 GB DDR4-2133 RAM capacity
    SO-DIMM module with 260 pins
    Supports a maximum of 16 GB per DIMM,  maximum total size: 32 GB
    Supports two unbuffered DIMM modules (no ECC or registered)
  • SSD storage
    120 GB SATA SSD drive in 6.35 cm / 2.5" format
  • M.2-2280 Slot
    The M.2 2280 BM slot provides the following interfaces:
    - PCI-Express Gen. 3.0 X4 with up to 32 Gbps Data Transfer Speed
    - SATA v3.0 (max. 6 Gbps)
    It supports M.2 cards with a width of 22 mm
    and a length of 42, 60 or 80 mm (type 2242, 2260, 2280).
    Supports M.2 SATA SSDs (with B+M key) and M.2 PCIe SSDs (with M key)
  • Card Reader
    Integrated card reader supports SD, SDHC and SDXC memory flash cards
  • Microphone and speakers
    Front panel with integrated Electret Condenser Microphone (front position) and one 2 W speaker (upper side)
  • Integrated Audio
    Realtek ALC269 Audio Codec
    Two analog audio connectors (3.5 mm) on the bottom side: 
    1) Line-out (headphones)
    2) Microphone input
    Digital Audio is supported via HDMI.
  • Wired Network
    Intel i211 Ethernet Controller with MAC, PHY and PCIe interface
    Supports 10 / 100 / 1.000 MBit/s operation
    Supports WAKE ON LAN (WOL) from S3, S4 modes
    Supports network boot by Preboot eXecution Environment (PXE)
  • Wireless Network (WLAN)
    Chipset: Realtek® RTL8723BE-CG
    M.2-2230AE Combo Module: AzureWave AW-NB165NF
    Two internal antennas support WLAN Transmit/Receive (1T1R) and Bluetooth
    Supports Wireless LAN IEEE 802.11b/g/n at 2,4 GHz
    Max. PHY data rate: 150 Mbps in 802.11n mode
    Supports Bluetooth 4.1
  • Front LEDs
    Power LED (blue)
    Hard disk LED (orange)
  • Connectors left side
    Power button
    2x USB 2.0 (type A)
    SD card reader
    Hole with Clear CMOS button
    Mounting hole for Kensington lock
  • Connectors right side
    Optional: 2x COM port (RS232)
  • Connectors bottom side
    HDMI 1.4 (supports digital video and digital audio)
    VGA connector (D-Sub 15 pol., analog video)
    2x USB 3.0 (type A)
    2x USB 2.0 (type A)
    Gigabit Network (LAN, RJ45)
    Audio Line-out / headphones (3.5 mm jack)
    Microphone input (3.5 mm jack)
    DC input for external power adapter (5.5 / 2.5 mm)
    2x COM port (RS232)
  • Connectors onboard
    Internal USB 2.0 type A connector for an USB cable
    Always power-on jumper JP7
    Serial ATA (data and power)
    3x USB 2.0 header (all occupied)
    eDP connector (Embedded DisplayPort) - occupied by the display
    LPC connector (occupied)
    I2C connector for optional NFC accessory
  • Power adapter
    External 65 W power adapter (fanless)
    Input: 100~240 V AC, 50/60 Hz, max. 1.6 A
    Output: 19 V DC, max. 3.42 A, max. 65 W
  • DC Input connector
    DC Input Connector: 5.5 / 2.5 mm (outer/inner diameter)
    The DC-input of the computer supports an external
    power source with either 12V±5% and 19V±5%.
  • Included Accessories:
    Quick Installation Guide
    Windows 10 Driver DVD
    External Power Adapter (65W / 19V) with DC cable (approx. 1.7 m)
    Power cord with Euro plug (approx. 1.75 m)
  • Optional Accessories:
    1) COM port adapter PCP21 or 2x PCP11 provides two more serial COM ports on the right side
    2) NFC module PNFC01 (no Linux and transaction support)
  • Environmental Criteria
    Operating temperature: 0~40 °C
    Humidity: 10~90 %
  • Certification and Compliance
    EMI: CE, FCC, FAC, BSMI, RCM, VCCI & TELEC, RED
    Safety: CB, EAC & FSS, BSMI, ETL
    Other compliances: RoHS, ErP Lot 3, Energy Star v6.0 (Level 6)
  • Conformity
    This device is classed as a technical information equipment (ITE) in class B and is intended for use in living room and office. The CE-mark approves the conformity by the EU directives:
    (1) 2004/108/EC relating to electromagnetic compatibility (EMC),
    (2) 2006/95/EC relating to Electrical Equipment designed for use within certain voltage limits (LVD),
    (3) 2009/125/EC relating to ecodesign requirements for energy-related products (ErP),
    (4) 1999/5/EC relating to Radio and Telecommunications Terminal Equipment (R&TTE)
© 2020 Shuttle Europe | Informazione legale | Contatto | CGC | Informativa privacy | Sitemap