|
|
Accessoire du DL10J pour intégration d’une carte 4G/LTE
Si vous souhaitez équiper le Shuttle XPC slim barebone DL10J d’une fonction réseau mobile, vous aurez besoin du kit accessoire WWN01. Il comprend une carte adaptateur Riser pour intégrer une carte 4G/LTE et une carte Nano SIM. La carte adaptateur Riser doit être installée dans l’emplacement M.2-2230, à la place du module Wifi existant. Deux antennes externes avec câbles sont également incluses dans la livraison.
|
|
- Contents:
- M.2 adapter card LN004
- Fastening screw for LTE/4G card (two-parts)
- 2x LTE/4G antennas
- 2x antenna cables with toothed lock washer and screw nut
- Quick installation guide - Adapter card (for DL10J only):
Riser card for the M.2-2230 Key E slot
Dimensions: 30 x 30 mm
- supports one LTE/4G module M.2-3042 Key B
- supports one SIM card in Nano format - Two external antennas:
LTE/4G dipole omnidirectional antenna
Multi-band: supports EU frequency bands (800, 1800, 2600 MHz) for GSM/UMTS/LTE and the following frequency ranges: 704~960, 1428~1575, 1720~2170, 2400~2690 MHz
Colour: black
Length overall: 135.7 mm
Dimensions of the antenna body: 114.8 mm x 20.1 mm
Impedance: 50 Ohm
Voltage Standing Wave Ratio (VSWR): <= 3.0
Radiation: Omni
Gain: 2 dBi
Polarisation: vertical
Connector: SMA - Two antenna cables:
RF cable lengths: 20 cm
Connectors:
1) SMA Pigtail female
2) I-PEX MHF 4 - Compatibility:
The WWN01 can be used for
- Shuttle XPC slim DL10J
- Shuttle Edge EN01J3, EN01J4, EN01E (adapter card is not required) - LTE module and SIM card are not included
Note that two more components are required for operation which are not included with WWN01:
- LTE/4G module M.2-3042 Key B
- SIM card in Nano format
Successfully tested LTE/4G modules:
- Sierra EM7455 (CAT 6, for Europa and North America)
- Sierra EM7430 (CAT 6, for APAC)
- Huawei ME906S (CAT 4, for EMEA, Australia, New Zealand)
- Quectel EM06-E (CAT 6, for EMEA, Australia, Brazil)
|
