WWN01

LTE/4G antennas for DL10J and EN01x
If you want integrated mobile network on your Shuttle XPC slim Barebone DL10J or Shuttle Edge EN01x, then you need the Shuttle XPC accessory WWN01 which includes two LTE/4G antennas with cables.
This kit also includes a riser adapter card which is required for DL10J only. It supports a LTE/4G module and a Nano SIM card for mobile network. The riser card is to be installed into the M.2-2230 slot of DL10J and replaces the pre-installed WLAN card.

• Contents:
  - M.2 adapter card LN004
  - Fastening screw for LTE/4G card (two-parts)
  - 2x LTE/4G antennas
  - 2x antenna cables with toothed lock washer and screw nut
  - Quick installation guide
• Adapter card (for DL10J only):
  Riser card for the M.2-2230 Key E slot
  Dimensions: 30 x 30 mm
  - supports one LTE/4G module M.2-3042 Key B
  - supports one SIM card in Nano format
• Two external antennas:
  LTE/4G dipole omnidirectional antenna
  Multi-band: supports EU frequency bands (800, 1800, 2600 MHz) for GSM/UMTS/LTE and the following frequency ranges: 704~960, 1428~1575, 1720~2170, 2400~2690 MHz
  Colour: black
  Length overall: 135.7 mm
  Dimensions of the antenna body: 114.8 mm x 20.1 mm
  Impedance: 50 Ohm
  Voltage Standing Wave Ratio (VSWR): <= 3.0
  Radiation: Omni
  Gain: 2 dBi
  Polarisation: vertical
  Connector: SMA
• Two antenna cables:
  RF cable lengths: 20 cm
  Connectors:
  1) SMA Pigtail female
  2) I-PEX MHF 4
• Compatibility:
  The WWN01 can be used for
  - Shuttle XPC slim DL10J
  - Shuttle Edge EN01J3, EN01J4, EN01E (adapter card is not required)
• LTE module and SIM card are not included
  Note that two more components are required for operation which are not included with WWN01:
  - LTE/4G module M.2-3042 Key B
  - SIM card in Nano format
  Successfully tested LTE/4G modules:
  - Sierra EM7455 (CAT 6, for Europa and North America)
  - Sierra EM7430 (CAT 6, for APAC)
  - Huawei ME906S (CAT 4, for EMEA, Australia, New Zealand)
  - Quectel EM06-E (CAT 6, for EMEA, Australia, Brazil)