SV24

Shuttle’s first SFF barebone

The SV24 integrates graphics, sound, network, firewire and USB on the size of a shoebox. This user-friendly case makes extremely good use of the space available with intelligent features like a sliding HDD tray. It has just enough room for everything you could need in a small PC.


  • Chassis
    The first XPC chassis type (made of aluminum)
    storage bays: 1 x 5.25" (external), 1 x 3.5" ( internal)
    dimensions: 27 x 19 x 17 cm (LWH)
  • Mainboard
    Shuttle FV24, Shuttle form factor, proprietary design for SV24
    chipset: VIA VT8604 + VIA VT82C686B
    Award PnP BIOS, 2MBit flash memory
    with hardware monitoring and ACPI power management functions
    dimensions: 17.5 x 19 cm
  • Power supply unit
    150 Watt mini PSU (ca. 15.3 x 8.2 x 4.3 cm)
    connectors: 20-pin ATX
  • Processor support
    Socket 370 supports the following processors:
    Intel FC-PGA Pentium III Coppermine 533/133 ~ 1000/133 MHz 
    Intel FC-PGA Pentium III Coppermine 500/100 ~ 850/100 MHz
    Intel PGA and FCPGA Celeron processors 300/66 ~ 800+/66 MHz
    and VIA Cyrix C3 processors up to 800+ MHz
    (note: Pentium III and Celeron with Tualatin core are not supported)
  • Processor cooling system
    matching cooling fan in the package
  • Memory support
    2 x 168 pin slots
    supports PC100 and PC133 SDRAM memory modules
    up to a total size of 1024 MB
  • Expansion slots
    1 x 32 Bit PCI slots rev. 2.2 (incl. PCI riser)
  • Integrated graphics controller
    Built in Savage 4 2D/3D graphics engine
    shared Memory max. 32MB
    with TV out support PAL and NTSC systems (Crontel 7006)
  • Audio controller
    VIA audio with AC '97 2.1 Codec
  • LAN controller
    Realtek 8100B Fast Ethernet network controller
    supports 10 / 100 MBit/s opteration
  • Firewire controller
    IEEE1394 Firewire controller VIA VT6306
    with 2 Firewire connectors (backpanel)
    supports 400Mb/s, 200Mb/s, 100Mb/s data transfer rate
  • Drive connectors
    2 x IDE ATA 100 drives
    1 x floppy disk drive
  • Front-panel I/O
    Microphone
    Headphone (Line-out)
    2x USB 1.1
  • Back-panel I/O
    VGA monitor connector (S-Video and Composite)
    2 x Firewire (6 pin)
    PS/2 for mouse and keyboard
    LAN (RJ45)
    2 x USB 1.1
    Line-in
    Line-out
    Serial port (COM)
    Parallel port>
  • Other onboard connectors
    1 x CDROM input
    2 x fan connectors
  • Conformity
    This device is classed as a technical information
    equipment (ITE) in class B and is intended for use in 
    living room and office. The CE-mark approves the 
    conformity by the EU-guidelines:
    - EMV-guideline 89/336/EWG electromagnetic tolerance
    - LVD-guideline 73/23/EWG use of electric devices 
    within certain voltage-limits 
© 2020 Shuttle Europe | Legal notice | Contacto | CCG | Protección de datos | Mapa del sitio