Benvenuti nel mondo dei mini-PC ShuttlePerche XPCProdottiAplicazionixCommunityDove acquistareSupportoArea BusinessArea Stampa
FAQs|Technical Information|Download|Customer Service|Servizio di reclamo RMA|
General Information|XPCs|TFTs|XPC Barebones|XPC Accessories|
Support |

How do I install RAID drivers on the SB75G2 during Windows 2000 or Windows XP installation?

In order to install Windows 2000 or Windows XP RAID drivers on the SB75G2, a floppy drive and floppy disk with the RAID driver is essential

In order to install Windows 2000 or Windows XP RAID drivers on theSB75G2, a floppy drive and floppy disk with the RAID driver is essential. 

Before you start you will need to create a Intel RAID Driver Floppy Disk (create a Intel RAID Driver Floppy Disk or download the driver from here and extract/UnZip into a Floppy Disk directly):

  1. On a system running Windows, insert Mainboard Driver CD.
  2. Insert a blank floppy diskette into the floppy drive.
  3. Double-click on the D:\Intel\Raid\F6 install\F6 install.exe and answer all prompts presented (Assumes your CD ROM Drives label is D.)
  4. When installation is complete, your floppy should contain the following files: iaStor.cat, iaStor.inf, iaStor.cat, License.txt, readme.txt and TXTSETUP.oem.

Using floppy drive:

Go into the BIOS setup utility and enable Drive A and Onboard FDC Controller.

  1. Enable Drive A.


  2. Enable Onboard FDC Controller.






  3. Press S key to select RAID driver.


  4. Insert the floppy disk you just made into the floppy drive.


  5. Select the driver for your operating system.


  6. After the driver is selected. Press Enter to continue installing Windows.

back previous article send print
top
Cercare
Shuttle Newsletter

Shuttle Pairs


Play Pairs - Crack the Highscore!
more
La newsletter di Shuttle, inviata su richiesta, presenta le novità dal mondo Shuttle.
2009
17.10.2009 02.18.33