Benvenuti nel mondo dei mini-PC ShuttlePerche XPCProdottiAplicazionixCommunityDove acquistareSupportoArea BusinessArea Stampa
FAQs|Technical Information|Download|Customer Service|Servizio di reclamo RMA|
General Information|XPCs|TFTs|XPC Barebones|XPC Accessories|

PE20 Installation Guide

Package Contents

Connection Illustration

   

How to install an Optical Drive?

Step 1: Loosen the four top screws and open the cover

Step 2: Lift out the heat sinks on both sides.
Step 3: Remove the front panel and LED cable. Step 4: Insert the IDE module into the casing.
Connect the power, signal and audio cables as shown.
Secure the module to the casing using four M3x8 screws.
Step 5: Re-insert heat sinks on both sides. Step 6: Re-attach the top cover.

How to install a Hard Drive Disk?

Step 1: Loosen the four top screws and open the cover Step 2: Lift out the heat sinks on both sides.
Step 3: Attach the Hard Drive brackets as shown. Step 4: Insert the IDE module into the casing.
Connect the power and signal cables as shown.
Secure the module to the casing using four M3x8 screws.
Step 5: Re-insert heat sinks on both sides. Step 6: Re-attach the top cover.

back sendprint
top
Cercare
Informazione collegata
Shuttle Newsletter

Shuttle Pairs


Play Pairs - Crack the Highscore!
more
La newsletter di Shuttle, inviata su richiesta, presenta le novità dal mondo Shuttle.
2009
16.10.2009 22.20.18