Benvenuti nel mondo dei mini-PC ShuttlePerche XPCProdottiAplicazionixCommunityDove acquistareSupportoArea BusinessArea Stampa
FAQs|Technical Information|Download|Customer Service|Servizio di reclamo RMA|
General Information|XPCs|TFTs|XPC Barebones|XPC Accessories|
Support |

Why does my front USB ports fail to work?

At the front of the XPC SB61G2v3 is a flat cable connecting the daughter board to the mainboard.

At the front of the XPC SB61G2v3 is a flat cable connecting the daughter board to the mainboard. If this cable is not connected properly, it will result in partial of full failure of the daughterboard. To correct this issue, please open the chassis and check the cable.

  1. Please double check the "Flat cable" is proper connected to motherboard and the front audio board. Check that the cable is not concavely inserted into the header.


  2. Make sure the "Flat cable" is fastened by "Lock bar".
  3. Wind the "Flat cable" as follows to avoid disturbing the cable in the future.

back previous article send print
top
Cercare
Shuttle Newsletter

Downloads


La newsletter di Shuttle, inviata su richiesta, presenta le novità dal mondo Shuttle.
2009
17.10.2009 22.34.01