Shuttle Europe

XPC Accessories


	Design\|Mobilità\|Tecnologia\|Nome del prodotto\|

	PC60 Silent 300W Power Supply Unit with 80PLUS logo

The PC60 provides the additional power needed to satisfy the demands of high power graphics cards and large capacity storage devices. The 80PLUS logo identifies PC60 as a modern product with at least 80% energy-efficiency whereas other power supplies range from 65-75% efficiency. It is the optimal solution for power users wanting to upgrade without compromising the efficiency, stability, low-noise, and portability of the XPC.

Input
Input Voltage: 100~240V AC
Input Current: 6A / 3A (100/240V AC)
Frequency: 60~50 Hz
Active PFC (Power Factor Correction)
Output
Total combined output (3.3V / 5V / 12V): 300W
Total combined output (3.3V / 5V): 90W
Max. Current: 3.3V: 14.5A / 5V: 15A / 12V: 2x 14A / -12V: 0.3A / 5VSB: 2A
Hold up time: >17ms (full load, 115V AC)
+12V Rise time: <20ms (full load, nominal line)
Short circuit protection (SCP): latch off
Other protection: OTP, OPP, UVP, OCP
Power good signal: TTL compatible
+5V Standby at 2.0A
+3.3V Remote sensing
Energy-efficiency
80 PLUS logo: at least 80% efficient at 20%, 50%, and 100% loads
aligns to the power supply requirements
in the EPA's Energy Star 4.0 standard for computers
Connectors
Mainboard ATX 4 pin (12V) + 20 pin
1x FDD, 3x S-ATA, 2x Molex
Cable length designed for the XPC
Environmental
Operating Temperature: 10~50°C
Storage Temperature: -40~70°C
MTBF: >100.000 hours (75% load, 25°C)
RFI/ EMI/ Safety
FCC class B, CE, BSMI, CCC
Acoustic
<30dB at 50cm for 200W LoadGeneral
Other
Dimension: 190 x 82 x 43 mm (l x w x h)
Weight: 0.9kg net, 1.0kg gross
XPC compatibility
Compatible with XPC chassis G, G2, G5, G6 and the models ST61G4, D10, K45, K48,
but it is NOT compatible with SD11G5, SS58G2, SK83G, SN85G4, SN95G5 and ST20G5.