P2 4800P (configurable)

• Recommended range of application: Performance
• System based on: the Shuttle XPC Barebone SX48P2 Deluxe
• Integrated Deluxe Features:
  Fingerprint recognition technology - brings convenient security to your PC
  Speed-Link - easily connect 2 PCs via USB and share data
  Wireless LAN 802.11b/g for wireless networking
  Bluetooth 2.0 transceiver is useful for connecting phones, printers, etc.
• Operating system:
  Microsoft Windows Vista (various versions available)
  9 languages available: German, English, French, Dutch, Italian,
  Spanish, Swedish, Finnish, Danish
• Chassis: Black P2-type aluminum chassis, stealthed drive doors
  dimensions: 32.5 x 22 x 21 cm (LWH)
• Processor:
  Socket 775 with Intel Core 2 Duo / Quad / Extreme processor
  with 800, 1066, 1333 or 1600 MHz front side bus
  with 65nm- or 45nm-technology
  up to Intel Core 2 Quad Extreme QX9770 with 3.2GHz / 1600MHz FSB
• SilentX Cooling Technology:
  New Shuttle I.C.E. heat-pipe module (Integrated Cooling Engine)
  SilentX Cooling and Noise Reduction Technology
  advanced Heatpipe technology, linear fan control.
  3 independent cooling areas.
  OASIS Cooling Technology: additional fanless heat-pipe design
  covering the MOSFET modules (VRM), north- and southbridge
• High-end chipset and components:
  Chipset: Intel X48 Express (MCH) + ICH9R (I/O Conroller Hub)
  Solid Capacitors for excellent heat resistance for enhanced system durability
• Hard disk: One or two Serial ATA hard disks, supports 3 Gbit/s
• Optical drive: 16x DVD Writer, supports Dual Format and Dual Layer
• Memory:
  With up to four DDR3-1066/1333/1600 memory modules (240 pins)
  Max. 2GB capacity per DIMM module, supports Dual Channel
• Graphics:
  PCI Express x16 graphics card from ATI or NVIDIA
  Optionally with two graphics cards (supports 4 monitors)
  Outputs: Sub-D (analog)*, DVI-I (digital/analog) and TV (S-Video/Composite)
  *) Sub-D connector may be provided by adapter optionally
• 8-channel audio with DD/DTS
  7.1 channel High Definition Audio, Realtek ALC888DD codec
  Supports Dolby® Digital Live! and DTS™ Connect (Digital Theater Systems)
  analog: line-out (8-ch), line-in, microphone, CD-in, AUX
  digital: optical and coaxial S/PDIF-out
• Dual Gigabit LAN Controller
  2x RJ45 connectors supports Teaming mode *)
  2x Marvell 88E8056 Ethernet network controller
  With PCI Express x1 interface
  IEEE 802.3u 1000Base-T compliant
  Supports 10 / 100 / 1.000 MBit/s opteration
  Supports Wake-on-LAN
• Cardreader optional
  optionally with 3.5" multi-format card reader (USB 2.0)
• Empty slots:
  1x PCI-Express x16 (if only one single-slot graphics card is chosen)
  1x Mini-PCIe x1 slot at the bottom of the chassis
  supports Intel Turbo Memory (codename: Robson)
• Front Panel connectors and functions
  Microphone
  Headphone (Line-out)
  2x USB 2.0
  Fingerprint recognition
  Power button with LED
  Hard disk LED
  Bluetooth LED
  WiFi (WLAN) LED
  Reset button
  Fingerprint Sensor
  Speedlink On/Off button
• Back Panel connectors
  6x USB 2.0
  2x GigaBit LAN (RJ45)
  2x External Serial ATA (eSATA) with power port and cable
  8-ch Audio line-out (2x rear/front, bass/center, surround/back)
  Digital Audio S/PDIF output: optical and coaxial
  Audio Line-in
  Audio Microphone input
  Clear CMOS button
  Wireless LAN Antenna
• Power supply
  450 Watt ATX mini PSU, AC input voltage: 100~240V
  80 PLUS® certified (80% or greater energy-efficient)
  Dimensions: 85(W) x 83(H) x150(D) mm
  Connectors: 20-pin ATX, 4-pin ATX12V
  Active PFC circuit (Power Factor Correction)
  With AC power switch
• Further configuration options
  It is possible to modify certain components of this
  configuration. Please refer to the "Shuttle Systems Configurator".
• Warranty: 24 Months Pick-Up-And-Return Service
• Conformity
  This device is classed as a technical information
  equipment (ITE) in class B and is intended for use in
  living room and office. The CE-mark approves the
  conformity by the EU-guidelines:
  - EMV-guideline 89/336/EWG electromagnetic tolerance
  - LVD-guideline 73/23/EWG use of electric devices
  within certain voltage-limits

*) Teaming Mode
The teaming function allows you to group both available network adapters together to function as a single adapter - a method of creating a virtual LAN. The benefit of this approach is that it enables load balancing and failover.