Bienvenido al mundo de los mini PC de ShuttlePorqué XPCProductosAplicacionesxCommunityFuentes comercialesSoporteÁrea BusinessPrensa
FAQs|Technical Information|Download|Customer Service|Servicio de reclamo RMA|
General Information|XPCs|TFTs|XPC Barebones|XPC Accessories|

PE20 Installation Guide

Package Contents

Connection Illustration

   

How to install an Optical Drive?

Step 1: Loosen the four top screws and open the cover

Step 2: Lift out the heat sinks on both sides.
Step 3: Remove the front panel and LED cable. Step 4: Insert the IDE module into the casing.
Connect the power, signal and audio cables as shown.
Secure the module to the casing using four M3x8 screws.
Step 5: Re-insert heat sinks on both sides. Step 6: Re-attach the top cover.

How to install a Hard Drive Disk?

Step 1: Loosen the four top screws and open the cover Step 2: Lift out the heat sinks on both sides.
Step 3: Attach the Hard Drive brackets as shown. Step 4: Insert the IDE module into the casing.
Connect the power and signal cables as shown.
Secure the module to the casing using four M3x8 screws.
Step 5: Re-insert heat sinks on both sides. Step 6: Re-attach the top cover.

back sendprint
top
Búsqueda
Información adicional
Shuttle Newsletter

Dónde Comprar


El boletín informativo de Shuttle le informa sobre todas las novedades en torno a Shuttle.
2009
20.10.2009 09:45:52