Bienvenido al mundo de los mini PC de ShuttlePorqué XPCProductosAplicacionesxCommunityFuentes comercialesSoporteÁrea BusinessPrensa
FAQs|Technical Information|Download|Customer Service|Servicio de reclamo RMA|
General Information|XPCs|TFTs|XPC Barebones|XPC Accessories|

PE20 Installation Guide

Package Contents

Connection Illustration

   

How to install an Optical Drive?

Step 1: Loosen the four top screws and open the cover

Step 2: Lift out the heat sinks on both sides.
Step 3: Remove the front panel and LED cable. Step 4: Insert the IDE module into the casing.
Connect the power, signal and audio cables as shown.
Secure the module to the casing using four M3x8 screws.
Step 5: Re-insert heat sinks on both sides. Step 6: Re-attach the top cover.

How to install a Hard Drive Disk?

Step 1: Loosen the four top screws and open the cover Step 2: Lift out the heat sinks on both sides.
Step 3: Attach the Hard Drive brackets as shown. Step 4: Insert the IDE module into the casing.
Connect the power and signal cables as shown.
Secure the module to the casing using four M3x8 screws.
Step 5: Re-insert heat sinks on both sides. Step 6: Re-attach the top cover.

back sendprint
top
Búsqueda
Información adicional
Shuttle Newsletter

Showroom 360°


Quiere tener una idea de cómo son los nuevos Shuttle XPC? Entonces ha llegado al lugar adecuado. Donde podrá ver nuestros productos en imágenes 3D.
more
El boletín informativo de Shuttle le informa sobre todas las novedades en torno a Shuttle.
2009
20.10.2009 05:43:54