Bienvenido al mundo de los mini PC de ShuttlePorqué XPCProductosAplicacionesxCommunityFuentes comercialesSoporteÁrea BusinessPrensa
FAQs|Technical Information|Download|Customer Service|Servicio de reclamo RMA|
General Information|XPCs|TFTs|XPC Barebones|XPC Accessories|
Support |

Why does my front USB ports fail to work?

At the front of the XPC SB61G2v3 is a flat cable connecting the daughter board to the mainboard.

At the front of the XPC SB61G2v3 is a flat cable connecting the daughter board to the mainboard. If this cable is not connected properly, it will result in partial of full failure of the daughterboard. To correct this issue, please open the chassis and check the cable.

  1. Please double check the "Flat cable" is proper connected to motherboard and the front audio board. Check that the cable is not concavely inserted into the header.


  2. Make sure the "Flat cable" is fastened by "Lock bar".
  3. Wind the "Flat cable" as follows to avoid disturbing the cable in the future.

back previous article send print
top
Búsqueda
Shuttle Newsletter

Shuttle Webcast


Los Shuttle XPCs son compactos, atractivos y de gran rendimiento. Esto se puede apreciar en las fotografías. Pero ahora, usted podrá ver en el Shuttle Webcast, todo lo que necesita saber sobre nuestros productos.
more
El boletín informativo de Shuttle le informa sobre todas las novedades en torno a Shuttle.
2009
16.10.2009 22:20:55