Bienvenido al mundo de los mini PC de ShuttlePorqué XPCProductosAplicacionesxCommunityFuentes comercialesSoporteÁrea BusinessPrensa
FAQs|Technical Information|Download|Customer Service|Servicio de reclamo RMA|
General Information|XPCs|TFTs|XPC Barebones|XPC Accessories|
Support |

How to install RAID driver on SB62G2 during Windows 2000 or Windows XP installation?

In order to install Windows 2000 or Windows XP RAID driver on SB62G2, floppy drive (or USB floppy drive) and floppy disk with RAID driver is essential

In order to install Windows 2000 or Windows XP RAID driver on SB62G2, floppy drive (or USB floppy drive) and floppy disk with RAID driver is essential.

Before you start you will need to do the following (create a Intel RAID Driver Floppy Disk or download the driver from here and extract/UnZip into a Floppy Disk directly):

  1. On a system running Windows, insert Motherboard Driver CD.
  2. Insert a blank floppy diskette into the floppy drive.
  3. Double-click on the D:\Intel\Raid\F6 install\F6 install.exe and answer all prompts presented, if your CD ROM Driver's label is D.
  4. When installation is complete, your floppy should contain the following files: iaStor.cat, iaStor.inf, iaStor.cat, License.txt, readme.txt and TXTSETUP.oem.

A: Using floppy drive:

  1. Go into BIOS setting to adjust SATA in RAID Mode.


  2. Install Windows, press F6 function key when Raid setup message string come up.


  3. Press S key to select RAID driver.


  4. Insert the floppy disk you just made into the floppy drive.


  5. Select the driver for your operating system.


  6. After the driver is selected. Press Enter to continue installing Windows.

 

back previous article send print
top
Búsqueda
Shuttle Newsletter

Showroom 360°


Quiere tener una idea de cómo son los nuevos Shuttle XPC? Entonces ha llegado al lugar adecuado. Donde podrá ver nuestros productos en imágenes 3D.
more
El boletín informativo de Shuttle le informa sobre todas las novedades en torno a Shuttle.
2009
17.10.2009 16:25:36