 |
|
|
|
|
|
|
|
|
|
|
|
|
- Chipset
VIA P4X266A for Pentium 4 processors with socket 478
Northbridge: VIA VT8753A (with passive-fan), Southbridge VIA VT8233A
- Socket 478 CPU Support
Intel Pentium 4 processor with Willamette- oder Northwood-core and P4 Celeron
with 400MHz FSB and 533MHz FSB
successfully tested with: P4 Celeron up to 1,8 GHz, P4 (Willamette 256KB Cache) up to 2,2GHz,
P4 (Northwood 400MHz FSB) up to 2,4GHz and P4 (Nortwood 533MHz FSB) up to 2,8GHz
Normally, there is no need to configure the processor.
In BIOS the following parameters can also be adjusted manually:
- FSB-frequency infinitely adjustable from 100 up to 160 MHz
- Vcore CPU-voltage fine adjustment: 1,100 up to 1,850V
- DDR-voltage: 2,55 / 2,60 / 2,65V
- Chipset-voltage: 2,55 / 2,60 / 2,65V
- Expansion Slots
1 x AGP (v2.0) slot supports 4X mode
5 x 32 Bit PCI (v2.2)
- Onboard IDE Controller
2-Channel Enhanced PCI IDE up to 4 IDE devices
supports UltraDMA/133 (ATA133)
- Integrated Multichannel Hardware Audio Function:
C-Media 8738 Hardware-Audio-Controller
supports 5.1 sound, C3DX Positional Audio in 6-Channel-speaker-mode
HRTF-3D Positional Audio, supports Direct Sound 3D and A3D-interface
applicable to Legacy SBPRO
Connectors on the backpanel: line-in, line-out, microphone, MIDI/gameport, line in/out
Bracket connector: for bass/center, bracket optionally in delivery
Multichannel operation: line-out = front, line-in = rear and onboard connector for bass/center
More line-ins on the mainboard audio-in for CD-ROM and AUX.
- Backpanel-connectors
1 x PS/2-Mouse
1 x PS/2-Keyboard
1 x Parallel (SSP/EPP/ECP)
2 x Serial (16550 compatible, Fifo)
2 x USB 1.1 (six more onboard, also USB 2.0)
Audio: line-in, line-out, microphone, MIDI/gameport
- Onboard-connectors
1 x Floppy drive (up to 2,88 MB)
4 x USB 2.0 and 2 x USB 1.1 (additional to the backpanel-connectors)
1 x Infrared (COM2 can be used for infrared communication, IrDA-adapter not included in delivery)
1 x WOL (Wake on Lan)
3 x Fan (CPU, AGP, chipset)
- Memory
3 x 184-Pin DIMM-socket for PC1600 or PC2100 DDR SDRAM memory
supports module sizes of 64, 128, 256, 512 and 1024MB
with 100 or 133MHz clock frequency up to a total capacity of
either 2GB unbuffered or 3GB registered DDR SDRAM.
- Hardware-monitoring
CPU-temperature, system voltage and fan revolution can be monitored
- Power Management
ACPI Version 1.0 (Advanced Configuration and Power Interface)
supports power saving modes: S1 (Snoop), S3 (Suspend to RAM), S5 (Soft-Off)
On/Off-button with two functions: Suspend-mode / soft-off
State after Power Failure: Auto/Off
- BIOS
Award V6.0PG PnP Green BIOS
2 MBit Flash EPROM
- ATX-power supply connector
Standard 20-pin-ATX-power supply connector
Additional 4-pin-connectorfor 12V
Additional 6-pin-connectorfor 3.3 and 5V
- Accessories
Mainboard with passive Northbridge-cooler, IDE-cable, floppy cable, detailed manual, bracket-adapter for bass/center and USB, driver CD-ROM
- Form Factor
ATX: 30.5 x 24.4 cm | |
|
  | |
|
|
|
|
 |
|
|
|
|
|
|
|
| Búsqueda |
|
|
|
|
|
|
| Shuttle Newsletter |
|
|
|
|
|
Downloads |
|
|
|
|
 |
| El boletín informativo de Shuttle le informa sobre todas las novedades en torno a Shuttle. | |
|
|
|
|