Bienvenido al mundo de los mini PC de ShuttlePorqué XPCProductosAplicacionesxCommunityFuentes comercialesSoporteÁrea BusinessPrensa
FAQs|Technical Information|Download|Customer Service|Servicio de reclamo RMA|
General Information|XPCs|TFTs|XPC Barebones|XPC Accessories|

How to use Winflash utility?

Preparation

1. Identify the current BIOS version (e.g.FN41S015) and make sure you have the next version (or desired version) (e.g.FN41S018)

Fig. 1: BIOS version location in POST screen

2. Get Winflash from Mainboard CD or download it from ftp://ftp.shuttle.com/BIOS/utility/

3. Download BIOS (z.B. fn41s018.bin) from http://global.shuttle.com/download/Download_Brb.asp or ftp://ftp.shuttle.com/BIOS/

4. Unzip the winflash.zip file and execute setup.exe to install.

Procedures

1. Open WinFlash.

Fig. 2: Location of the WinFlash utility

The beginning screen of the WinFlash (2 different screen are available.)

Fig. 3: First screen of the WinFlash(1)

Fig. 4: First screen of the WinFlash(2)

2. Select Update Option: “DMI Area” and “Clear CMOS”

Fig. 5: All selected options will change from green to blue

The “PnP Area” option will be available if there is “ESCD block”

This is not required for updating the BIOS.  Ps. ESCD: Extended System Configuration Data

3. Update/Flash BIOS

3.1 Select file:  File & Open. Or Click Open icon

Fig. 7: 1st step in flashing/updating BIOS

Load the BIOS file you stored, select the BIOS name and then click Open.

Fig. 8: Location of BIOS file

3.2 Execute the file: Select File & Update BIOS or click on the "Update BIOS now" icon to execute the update.

Fig. 9: Location of BIOS update icon

4.Select "Update" button to start updating BIOS.

Fig. 10: Final message in updating BIOS

5. After BIOS has been updated, a REBOOT Message will show. Click "Yes" to continue.

Rebooting initializes new changes. Take note of the new BIOS number on the first page of the POST screen.

Fig. 12: Location of new the BIOS name.

Finally, when the update is complete, restart and enter CMOS Setup Utility (hold down delete at start up). Select "Load Optimized Defaults", then "Save & Exit Setup".

Fig. 13: BIOS setting.

back sendprint
top
Búsqueda
Shuttle Newsletter

Shuttle Barebone K45


El mini PC de precio increíble
more
El boletín informativo de Shuttle le informa sobre todas las novedades en torno a Shuttle.
2009
16.10.2009 16:54:10