Package Contents
![](../images/pe20_installation01.gif)
|
Connection Illustration
![](../images/pe20_installation02.gif)
|
|
|
How to install an Optical Drive?
![](../images/pe20_installation04.gif)
|
![](../images/pe20_installation05.gif)
|
Step 1: Loosen the four top screws and open the cover |
Step 2: Lift out the heat sinks on both sides. |
![](../images/pe20_installation03.gif) |
![](../images/pe20_installation10.gif) |
Step 3: Remove the front panel and LED cable. |
Step 4: Insert the IDE module into the casing. Connect the power, signal and audio cables as shown. Secure the module to the casing using four M3x8 screws. |
![](../images/pe20_installation07.gif) |
![](../images/pe20_installation08.gif) |
Step 5: Re-insert heat sinks on both sides. |
Step 6: Re-attach the top cover. |
How to install a Hard Drive Disk?
![](../images/pe20_installation04.gif)
|
![](../images/pe20_installation05.gif) |
Step 1: Loosen the four top screws and open the cover |
Step 2: Lift out the heat sinks on both sides. |
![](../images/pe20_installation06.gif) |
![](../images/pe20_installation09.gif) |
Step 3: Attach the Hard Drive brackets as shown. |
Step 4: Insert the IDE module into the casing. Connect the power and signal cables as shown. Secure the module to the casing using four M3x8 screws. |
![](../images/pe20_installation07.gif) |
![](../images/pe20_installation08.gif) |
Step 5: Re-insert heat sinks on both sides. |
Step 6: Re-attach the top cover. |