Bienvenido al mundo de los mini PC de ShuttlePorqué XPCProductosAplicacionesxCommunityFuentes comercialesSoporteÁrea BusinessPrensa
FAQs|Technical Information|Download|Customer Service|Servicio de reclamo RMA|
General Information|XPCs|TFTs|XPC Barebones|XPC Accessories|
Support |

Why does the system fail to power up?

At the front of the XPC SB61G2v3 is a flat cable connecting the daughter board to the mainboard.

At the front of the XPC SB61G2v3 is a flat cable connecting the daughter board to the mainboard. If this cable is not connected properly, it will result in partial of full failure of the daughterboard. To correct this issue, please open the chassis and check the cable.

  1. Please double check the "Flat cable" is proper connected to motherboard and the front audio board. Check that the cable is not concavely inserted into the header.


  2. Make sure the "Flat cable" is fastened by "Lock bar".
  3. Wind the "Flat cable" as follows to avoid disturbing the cable in the future.

back previous article send print
top
Búsqueda
Shuttle Newsletter

Shuttle Systems Configurator


El boletín informativo de Shuttle le informa sobre todas las novedades en torno a Shuttle.
2009
17.10.2009 05:54:36