Welcome to the world of Shuttle Mini PCsWhy XPCProductsUsagexCommunityWhere to buySupportBusiness AreaPress
FAQs|Technical Information|Download|Customer Service|RMA service handling|
General Information|XPCs|TFTs|XPC Barebones|XPC Accessories|

PE20 Installation Guide

Package Contents

Connection Illustration

   

How to install an Optical Drive?

Step 1: Loosen the four top screws and open the cover

Step 2: Lift out the heat sinks on both sides.
Step 3: Remove the front panel and LED cable. Step 4: Insert the IDE module into the casing.
Connect the power, signal and audio cables as shown.
Secure the module to the casing using four M3x8 screws.
Step 5: Re-insert heat sinks on both sides. Step 6: Re-attach the top cover.

How to install a Hard Drive Disk?

Step 1: Loosen the four top screws and open the cover Step 2: Lift out the heat sinks on both sides.
Step 3: Attach the Hard Drive brackets as shown. Step 4: Insert the IDE module into the casing.
Connect the power and signal cables as shown.
Secure the module to the casing using four M3x8 screws.
Step 5: Re-insert heat sinks on both sides. Step 6: Re-attach the top cover.

back sendprint
top
Search
Further Information
Shuttle Newsletter

Shuttle Systems Configurator


The K-Series is Shuttle’s most cost-effective Mini-PC model range. The K-Series is ideal for the office and simple daily routine applications.
2009
14.10.2009 18:53:58