Welcome to the world of Shuttle Mini PCsWhy XPCProductsUsagexCommunityWhere to buySupportBusiness AreaPress
FAQs|Technical Information|Download|Customer Service|RMA service handling|
General Information|XPCs|TFTs|XPC Barebones|XPC Accessories|
Support |

How do I install OS on SATA hard drive on the SN85G4?

To install a SATA hard drive on the SN85G4, a floppy drive( or USB floppy drive) and floppy disk with the correct RAID driver are essential

To install a SATA hard drive on the SN85G4, a floppy drive( or USB floppy drive) and floppy disk with the correct RAID driver are essential.

Before you start you need to do the following (This procedure will need to be done on other system):

  1. Insert the motherboard driver CD into your CD-ROM.
  2. Copy all files in RAID directory (D:\silicon\RAID) to a floppy disk. (Current CD driver is in Drive D) or download from here
  3. Using the floppy disk in the installation procedure as follows. 

Go into the BIOS setting to enable; Drive A, Onboard FDC Controller and SiI3512A SATA Raid ROM.

  1. Enable Drive A if you are using floppy drive.  If you are using USB floppy drive, leave the Drive A as None.


  2. Enable Onboard FDC Controller


  3. Enable SiI3512A SATA Support


  4. Installing Windows
  5. Press F6 function key when RAID setup message string come up.


  6. Press S key to select RAID driver.


  7. Select the driver for your operating system.


  8. After the driver is selected.  Press Enter to continue installing Windows.

back previous article send print
top
Search
Shuttle Newsletter

Learn more about the Shuttle D 1416S


The K-Series is Shuttle’s most cost-effective Mini-PC model range. The K-Series is ideal for the office and simple daily routine applications.
2009
15.10.2009 05:20:14