 |
|
|
|
|
|
|
|
 |
|
|
|
|
- Chipset
SiS648 for Pentium 4 processors with socket 478
Northbridge: SiS648 and Southbridge: SiS963
- Socket 478 CPU support
Intel Pentium 4 processor (Willamette or Northwood) and P4 Celeron
with 400MHz or 533MHz FSB (100 resp. 133MHz Quad-Datarate-Process)
successfully tested with: P4 Celeron up to 1,8 GHz, P4 (Willamette 256KB Cache) up to 2,2GHz,
P4 (Northwood 400MHz FSB) up to 2,5GHz and P4 (Northwood 533MHz FSB) up to 2,8GHz
- Expansion Slots
1 x AGP Pro slot supports 8X mode
5 x 32 Bit PCI (v2.2)
- Onboard IDE Controller
2 Channel Enhanced PCI IDE-Controller for up to 4 IDE devices
supports UltraDMA/133 (ATA133)
- ATA133-RAID-Controller
2 Channel RAID-Controller High Point 372 for up to 4 IDE devices
supports UltraDMA/133 (ATA133)
supports RAID-modes 0, 1 and 0+1
- Serial-ATA-Controller
2x Marvell 88i8030 Serial ATA Controller
supports 2 hard disks with Serial-ATA-interface
for a transfer rate up to 1,5Gbit/s
Caution: The picture serves to compare both interfaces only.
Only one operation mode each can be run simultaneously on the RAID-controller:
either Serial-ATA or IDE with Parallel-cable.
- Integrated Multichannel Audio Function:
onboard Realtek ALC650 6 channel audio function
conforming to specification AC'97 v2.2
Connectors on the backpanel: line-in, line-out, microphone, MIDI/gameport, line in/out
Connectors on the bracket: for bass/center, bracket optionally included in delivery
Connectors onboard: Audio-in for CD-ROM, AUX, SPDIF
- Backpanel-connectors (standard-panel)
1 x PS/2-Mouse
1 x PS/2-Keyboard
1 x Parallel (SSP/EPP/ECP)
2 x Serial (16550 compatible, Fifo)
2 x USB 2.0 (four more onboard)
Audio: line-in, line-out, microphone, MIDI/gameport
- Onboard-connectors
1 x Floppy drive
4 x USB 2.0 (additional to both backpanel-connectors)
3 x Firewire IEEE1394 (optionally with bracket and 2 connectors)
1 x CD-in and 1 x AUX
1 x SPDIF
3 x Fan (CPU, AGP, Chipset)
- Memory
3 x 184-pin DIMM-Socket
for PC1600 (DDR200), PC2100 (DDR266) or PC2700 (DDR333) DDR SDRAM memory
supports module sizes of 128, 256, 512 and 1024MB
supports 6 banks with 100, 133 or 166MHz clock frequency up to 3GB capacity
- Hardware-monitoring
CPU-temperature, system voltage and fan revolution can be monitored
- Overclocker-friendly
CPU-Clock: 100...165MHz in 1MHz-steps
CPU-Clock ratio: 10...24
CPU/DRAM-Clock ratio: 1:1, 3:4, 3:5, 1:2
CPU Vcore: 1,1 ... 1,825V and above 1,85V: 1,85 ... 2,40V
Vdimm = 2,55 ... 2,75V
with two practical onboard-buttons for reset and power
- BIOS
Award/Phoenix-BIOS auf 2 MBit Flash EPROM
IRQ-adjustment automatically or manually possible
- ATX-power supply connector
Standard 20-pin-ATX-power supply connector
Additional 4-pin-connector for 12V
Additional 6-pin-connector for 3,3 and 5V
- Form Factor
ATX: 30,5 x 24,4 cm
- Accessories
Mainboard, driver-CD, 2 IDE- and 1 Floppy-cable, bracket adapter for USB (optional), firewire and audio (center/bass), manual for RAID-controller (optional), and a Serial-ATA cable | |
|
  | |
|
|
|
|
 |
|
|
|
|
|
|
|
| Search |
|
|
|
|
|
|
| Related Links |
|
|
| Shuttle Newsletter |
|
|
|
|
|
Shuttle XPC Barebone Finder |
|
|
|
|
 |
| The K-Series is Shuttle’s most cost-effective Mini-PC model range. The K-Series is ideal for the office and simple daily routine applications. | |
|
|
|
|