Caution: The current Shuttle website is located here: http://www.shuttle.com
This website includes backup data for products until September 2004.
 
 
Products Support Glossary
Print
 
HomeProductsXPCSS50Info/FAQHeatpipe cooling upgrade
  
 

 

XPC SS50
Subchapters: Specification | Accessories | Mainboard FS50 | Download | Info/FAQ | Images | Press |
 

 

 
  • Mini-Aluminium-Barebone-System
  • Socket 478 supports 400FSB
  • Chipset: SiS 650 / SiS 961
  • 2x PCI, 2x DDR266/200, 6x USB 1.1
  • 6-Channel-Audio, LAN, Firewire and much more

 

 

Frequently asked questions (FAQ)

Subchapters: Related Links | CPU Support List | Full system configuration | Reduce noise | adhesive thermal silicone gel | maximum TV resolution | TV screen unclear? | SPDIF out | Install Linux | Install PCI VGA card | Hardware monitoring | TV-out setting | Heatpipe cooling upgrade |

 

Heatpipe cooling upgrade

I want to upgrade my SS50C's CPU fan to PH4 (Heat-Pipe), do you have any suggestion for me?

The PH4 Heat-Pipe is available already, but there is a limited space for the CD / DVD-ROM / CDRW drive. The maximum length is 207mm, so please make sure your CD / DVD-ROM/ CDRW is shorter then 207mm. 

1.Please remove your CDROM / HDD / FDD

2.Remove the CPU fan & heat-sink

3. Remove the system fan


4. Apply thermal grease on top of CPU die.

5.Check PH4 and it's accessories are in place

6.Install Heat-Pipe in SS50C



7.Install PH4 fan and plug connector onto Fan3 header


8. Finally, install back all other peripherals for a quite and best cooling SS50C.

 

 

  Navigation
Home
Products
XPC
SS50
Info/FAQ
Related Links
CPU Support List
Full system configuration
Reduce noise
adhesive thermal silicone gel
maximum TV resolution
TV screen unclear?
SPDIF out
Install Linux
Install PCI VGA card
Hardware monitoring
TV-out setting
Heatpipe cooling upgrade

Shuttle Computer - European Headquarters +++ Disclaimer +++ Last update: 30.4.2008