| |
Mainboard MK32N with blue plate
 Specification
- Chipset
VIA KM266 Chipset supports 100/133MHz BUS
Northbridge: VT8375, Southbridge: VT8233A
With passive Northbridge-cooler - Socket A CPU support
supports the following 462Pin Socket A Processors with 200 and 266MHz FSB:
Athlon T-Bred, Athlon XP, Athlon Thunderbird, Duron
successfully tested with: Duron up to 1,3GHz / Athlon with up to 1,4GHz / Athlon XP up to 2600+ - Integrated 3D-Graphics accelerator:
S3 ProSavage8-Graphics accelerator integrated in chipset
Shared Memory adjustable in BIOS: 8, 16, 32 MB - Expansion slots
1 x AGP (supports 4X-mode)
3 x 32 Bit PCI
1 x CNR (Communication Network Riser) - Onboard IDE Controller
2 Channel Enhanced PCI IDE
for up to four IDE devices
supports up to UltraDMA 133 - Integrated Network Function
Realtek RTL8100B Fast Ethernet Controller with MAC Interface
supports 10/100MBit, with RJ45-connector in backpanel - Hardware monitoring
for voltage, temperature und fan revolution - More interfaces
Backpanel (Connectors on the back of the mainboard)
1 x VGA
1 x PS/2 Mouse
1 x PS/2 Keyboard
2 x USB 1.1 (two more onboard)
1 x RJ45 Network connector
1 x Parallel (SSP/EPP/ECP)
1 x Serial (16550 compatible, Fifo - second port onboard)
Audio: line-in/out, microphone, Midi/gameport
Onboard (More connectors on the mainboard)
1 x Floppy drive (for two floppy drives up to 2,88 MB)
1 x Serial (bracket-adapter not included in delivery content)
1 x Infrared (COM2 can be used for infrared communication, IrDA-adapter not included in delivery)
2 x USB 1.1 (two further on backpanel)
2 x Audio connector (CD and AUX)
2 x Audio-connector for frontpanel (microphone and line-out)
1 x SPDIF-out (electric)
1 x Wake-on-LAN (WOL)
1 x Wake-on-Modem (WOM)
2 x 12V connectors for fans (CPU and case) - Memory
2 x 184-Pin DIMM-Sockel
for PC1600/2100 (DDR200/266) DDR SDRAM up to 2 GB capacity
for sizes of 128, 256, 512 and 1024 MB - Soundfunction
Software-Audio with AC'97 2.2 conforming CODEC onboard - Power Management
Power saving modes: Doze, Standby and Suspend
ACPI (Advanced Configuration and Power Interface)
supports Suspend to RAM
Power on Modem, Timer, network, PCI-card
On/Off button with two more functions: Suspend / Soft-off
supports Power on after power failure - BIOS
2 MBit Flash EPROM with AWARD Bios
with write-protection jumper - Form Factor:
MicroATX: 24,4 x 22 cm
| Navigation |
 |
|
