XPC SB81P

Note: Mainboard only available in conjunction with XPC SB81P!

• Chipset:
  Northbridge: Intel 915G
  Southbridge: ICH6R
• Processor-Support
  System Clock: 800/533 MHz FSB
  CPU-Socket: LGA775
  CPU-Support: Intel Pentium 4 processors for socket 775 with 800 or 533MHz FSB
• Expansion Slots:
  1 x PCI-Express (PCI-E, 16X)
  1 x 32 Bit PCI (v2.2)
• IDE-Controller
  Onboard IDE Controller ATA100
  supports up to IDE-drives
• SATA RAID-Controller
  Onboard Serial ATA150 RAID Controller
  supports RAID-Level 0 and 1
  for up to four Serial-ATA-drives
• Multimedia:
  8-Channel sound
  Connectors on the backpanel: 8-channel audio-out (analogous: 2x rear/front, bass/center, surround/back),
  optical SPDIF-in and out, coaxial SPDIF-out
  Connectors on the frontpanel: microphone, line-out (headphones)
  More line-ins on the mainboard for 2x CD-ROM and AUX.
• Ethernet:
  Ethernet: 10/100/1.000 MBit
  Broadcom 5751
• Backpanel-Connectors:
  1 x PS/2-Mouse
  1 x PS/2-Keyboard
  1 x Serial
  1 x VGA
  1 x RJ45 (GigaBit LAN)
  2 x USB 2.0 (total 8)
  1 x Firewire (6 pol.)
  Connectors on the backpanel: 8-channel audio-out, line-in,
  optical SPDIF-in and out, coaxial SPDIF-out
  Clear CMOS-button
  optional parallel port
  optional Wireless-LAN-Adaptor/Antenna
• Onboard-Connectors:
  1 x Floppy drive
  1 x IDE (ATA-100)
  6 x USB 2.0 (2 for the frontpanel, total 8x USB)
  2 x CDROM audio-in
  1 x AUX
  Fan-connectors
• Memory:
  2 x 184-Pin for Dual Channel PC2700 (DDR333) or PC3200 (DDR400)
  unbuffered DDR SDRAM memory with 166 or 200MHz clock frequency up to a total capacity of 2GB
• Hardware-Monitoring
  CPU-temperature, system voltages and fan revolution
• Power Management
  ACPI Version 1.0 (Advanced Configuration and Power Interface)
  supports power saving modes: S1 (Snoop), S3 (Suspend to RAM), S4 (Suspend to DISK), S5 (Soft-Off)
  On/Off-button with two functions: suspend-mode / soft-off
• BIOS
  Award V6.0PG PnP Green BIOS
  stored in 4MBit Flash-memory chip
• ATX-power supply connector
  8-Pin ATX2, 6-Pin ATX1, 4-Pin ATX3
• Form Factor
  Micro-ATX: 20,5 x 28 cm
• Conformity
  This device is classed as a technical information equipment (ITE) in class B and is intended for use in living room and office. The CE-mark approves the conformity by the EU-guidelines:
  - EMV-guideline 89/336/EWG electromagnetic tolerance
  - LVD-guideline 73/23/EWG use of electric devices within certain voltage-limits