XPC SB62G2

Note: Mainboard only available in conjunction with XPC SB62G2!

• Chipset:
  Intel 865G/ICH5
  BUS: 800/533/400MHz
  Socket 478 CPU support
  Intel Pentium 4 processor for socket 478 with 800, 533 and 400MHz FSB
  (Pentium 4 with Northwood core are supported, Willamette and Prescott are not supported)
• Expansion slots:
  1 x AGP (8X)
  1 x 32 Bit PCI (v2.2)
• IDE-Controller
  Onboard IDE Controller ATA100
  supports up to four IDE drives
• SATA RAID-Controller
  Onboard Serial ATA150 RAID Controller
  supports RAID-Level 0
• Multimedia:
  AC97 2.2 6-Channel Sound
  Connectors on the backpanel: 6 channel audio out (analog: bass/center, rear, front), optical SPDIF in/out
  Connectors on the frontpanel: Mike, Line-out
  Besides further in ports on the mainboard for SPDIF, CD-ROM and AUX.
• Dual LAN:
  Ethernet 1: 100/10 Mbps, Realtek 8100B
  Ethernet 2: 100/10 Mbps, Intel 562EZ
• Backpanel connectors:
  1 x PS/2 Mouse
  1 x PS/2 Keyboard
  1 x Serial
  2 x RJ45 Ethernet 100/10 Mbps
  4 x USB 2.0 (total 8)
  6 Channel audio out (analog: bass/center, rear, front)
  optical SPDIF in/out
• Onboard connections:
  1 x Floppy drive (up to 2,88 MB)
  2 x IDE (ATA-100)
  4 x USB 2.0 (2 for the frontpanel, 2 for intern. 4 more on the backpanel, total 8)
  1 x SPDIF (in/out)
  2 x Audio frontpanel connectors (microphone and line-out)
  1 x CDROM Audio-in
  1 x Audio AUX
  1 x Infrared interface
  3 x Fan (CPU, AGP, Case)
• Memory:
  2 x 184-Pin for Dual Channel PC1600 (DDR200), PC2100 (DDR266), PC2700 (DDR333) or PC3200 (DDR400)
  unbuffered DDR SDRAM memory with 100 or 200MHz clock frequency up to 2GB capacity
• Hardware monitoring:
  CPU temperature, voltage and fan revolution
• Power Management:
  ACPI Version 1.0 (Advanced Configuration and Power Interface)
  supports power saving modes: S1 (Snoop), S3 (Suspend to RAM), S4 (Suspend to DISK), S5 (Soft-Off)
  On/Off button with two functions: Suspend mode/ soft off
  Power on after power failure
• BIOS:
  Award V6.0PG PnP Green BIOS
  stored in 4MBit Flash-memory chip
• ATX power supply connector:
  Standard 20-Pin-ATX-power supply + 4-pins
• Form Factor
  Micro-ATX: 254mm x 185mm
• Conformity
  This device is classed as a technical information equipment (ITE) in class B and is intended for use in living room and office. The CE-mark approves the conformity by the EU-guidelines:
  - EMV-guideline 89/336/EWG electromagnetic tolerance
  - LVD-guideline 73/23/EWG use of electric devices within certain voltage-limits